User Manual

28 | OSD warning messages
OSD warning messages
When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie),
the manual brightness adjustment is disabled.
To allow manual adjustment of brightness, the Dynamic Contrast
No
Yes
will be switched o.
To allow manual adjustment of brightness, the Dynamic Contrast
SE2417HGX
Do you want to continue?
Dell 24 Monitor
When the monitor does not support a particular resolution mode, the following message is
displayed:
The current input timing is not supported by the monitor display.
Please change your input timing to
1920x1080, 60Hz or any
other monitor listed timing as per the monitor specications.
SE2417HGX
Dell 24 Monitor
This means that the monitor cannot synchronize with the signal that it is receiving from
the computer. See Monitor specifications for the Horizontal and Vertical frequency ranges
addressable by this monitor. Recommended mode is 1920 x 1080.
Before the DDC/CI function is disabled, the following message is displayed:
Dell 24 Monitor
The function of adjusting display setting using PC application will
No
Yes
be disabled.
SE2417HGX
Do you wish to disable DDC/CI function?
When the monitor enters the Power Save Mode, the following message appears: