User’s Guide Dell SE2717H/SE2717HX/SE2717HR Model No.
NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2016–2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
Contents About your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package contents . . . . . . . . . . . . . . . . . . . . . . 6 Product features . . . . . . . . . . . . . . . . . . . . . . 7 Identifying parts and controls . . . . . . . . . . . . . . . 9 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Back view . . . . . . . . . . . . . . . . . . . . .
Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . 21 Connecting the stand . . . . . . . . . . . . . . . . . . . .21 Connecting your monitor . . . . . . . . . . . . . . . . . 22 Connecting the VGA cable (sold separately for SE2717HX/ SE2717HR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Connecting the HDMI cable (sold separately for SE2717H) . . . . 22 Organizing cables . . . . . . . . . .
Product-specific problems . . . . . . . . . . . . . . . . 49 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 FCC notices (U.S. Only) and other regulatory information50 Contacting Dell . . . . . . . . . . . . . . . . . . . . . . .
About your monitor Package contents Your monitor ships with the components shown in the table below. If any component is missing, contact Dell technical support. For more information see Contacting Dell. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries. NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.
• HDMI Cable (for SE2717HX/ SE2717HR) DellTM SE2717H/SE2717HX/HR Monitor • Drivers and Documentation Media • Quick Setup Guide • Safety and Regulatory Information Product features The Dell SE2717H/SE2717HX/SE2717HR flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), anti-static, and LED backlight. The monitor features include: • SE2717H/SE2717HX/SE2717HR: 68.6 cm (27 inch) viewable area display (measured diagonally).
• Supports AMD FreeSync™ technology. • Optimize eye comfort with a flicker-free screen. • ComfortView feature is designed to reduce the amount of blue light emitted from the monitor to optimize eye comfort. See the Safety Instructions.
Identifying parts and controls Front view 1 2 Control buttons Label 1 2 Description Function buttons (For more information, see Operating your monitor) Power On/Off button NOTE: For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
Back view 4 SE2717H/SE2717HX SVC Tag: xxxxxxx Express Service Code: xxx xxx xxx x S/N: CN-12MWY64180-341-001L -A00 SE2717Hc 1.5A XXXXX CAN ICES-3(B)/BMB-3(B) Apparatet må lkoples jordet s kkontakt. Apparaten skall anslutas ll jordat u ag. Laite on liite ävä suojakoske milla varuste uun pistorasiaan. Apparatets s kprop skal lslu es en s kkontakt med jord, som giver forbindelse l s kproppens jord. R33037 RoHS 䊂 Date of Mfg/⭕ӝᰛᵕ ⭕⭘ᰛᵕ: May. 2015 Date of Mfg/ Consumo de energía: xx.
Side view Bottom view 1 2 3 Bottom view without monitor stand Label 1 2 3 Description Power port HDMI port VGA port Use Connect the power cable. Connect your computer with HDMI cable. Connect your computer with VGA cable.
Monitor specifications Model Screen type Panel type Viewable image Diagonal Horizontal, Active Area Vertical, Active Area Area Pixel pitch Viewing angle Luminance output Contrast ratio Faceplate coating Backlight Response time Color depth Color gamut FreeSync support frame frequency (HDMI port only) Dell display manager compatibility Connectivity Border width (edge of monitor to active area) Security Adjustability 12 │ About your monitor SE2717H/SE2717HX/SE2717HR Active matrix-TFT LCD In-Plane Switchin
Resolution specifications Model Horizontal scan range Vertical scan range Maximum preset resolution SE2717H/SE2717HX/SE2717HR 30 kHz to 83 kHz (automatic) 48 Hz to 76 Hz (automatic) 1920 x 1080 at 60 Hz for VGA port. 1920 x 1080 at 75 Hz for HDMI port.
Electrical specifications Model Video input signals AC input voltage/frequency/ current Inrush current 14 │ About your monitor SE2717H/SE2717HX/SE2717HR • HDMI 1.4, 600mV for each differential line, 100 ohm input impedance per differential pair, • Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance 100 VAC to 240 VAC / 50 Hz or 60 Hz ± 3 Hz / 1.5A Note: The AC input current need to be 1.5A (typical). • 120 V: 30 A (Max.) at 0°C (cold start) • 240 V: 60 A (Max.
Physical characteristics Model Signal cable type Dimensions (with stand) Height Width Depth Dimensions (without stand) Height Width Depth Stand dimensions Height Width Depth Weight Weight with packaging Weight with stand assembly and cables Weight without stand assembly (no cables) Weight of stand assembly Front-frame gloss (minimum) SE2717H/SE2717HX/SE2717HR • Digital: detachable, HDMI, 19 pins • Analog: detachable, D-Sub, 15 pins 458.7 mm (18.06 in) 621.1 mm (24.45 in) 185.4 mm (7.30 in) 369.0 mm (14.
Environmental characteristics Model Temperature Operating Non-operating SE2717H/SE2717HX/SE2717HR 0°C to 40°C (32°F to 104°F) • Storage: -20°C to 60°C (-4°F to 140°F) • Shipping: -20°C to 60°C (-4°F to 140°F) Humidity Operating Non-operating 20% to 80% (non-condensing) • Storage 10% to 90% (non-condensing) • Shipping 10% to 90% (non-condensing) Altitude Operating (maximum) Non-operating (maximum) Thermal dissipation 5,000 m (16,400 ft) 12,192 m (40,000 ft) 105.85 BTU/hour (maximum) 68.
** Maximum power consumption with max luminance, and USB active. This document is informational only and reflects laboratory performance. Your product may perform differently, depending on the software, components and peripherals you ordered and shall have no obligation to update such information. Accordingly, the customer should not rely upon this information in making decisions about electrical tolerances or otherwise. No warranty as to accuracy or completeness is expressed or implied.
Pin assignments VGA connector Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15-pin Side of the Connected Signal Cable Video-Red Video-Green Video-Blue GND Self-test GND-R GND-G GND-B Computer 5V/3.
HDMI connector Pin Number 19-pin Side of the Connected Signal Cable 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 TMDS DATA 2+ TMDS DATA 2 SHIELD TMDS DATA 2TMDS DATA 1+ TMDS DATA 1 SHIELD TMDS DATA 1TMDS DATA 0+ TMDS DATA 0 SHIELD TMDS DATA 0TMDS CLOCK+ TMDS CLOCK SHIELD TMDS CLOCKCEC Reserved (N.C.
Plug and play capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic, you can select different settings if desired. For more information about changing the monitor settings, see Operating your monitor.
Setting up the monitor Connecting the stand NOTE: The stand is detached when the monitor is shipped from the factory. NOTE: This is applicable for a monitor with a stand. If you have purchased a third-party stand, refer to the respective stand setup guide for the set up instructions. To attach the monitor stand: 1. Place the monitor on a soft cloth or cushion. 2. Insert the tabs on the upper part of the stand in to the grooves on the back of the monitor. 3. Press down the stand till it snaps into place.
Connecting your monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. NOTE: Do not connect all cables to the computer at the same time. It is recommend to route the cables through the cable-management slot before you connect them to the monitor. To connect your monitor to the computer: 1. Turn Off your computer and disconnect the power cable. 2. Connect the VGA or HDMI cable from your monitor to the computer.
Organizing cables Use the cable-management slot to organize the cables connected to your monitor.
Removing the stand NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft and clean surface. NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for the set-up instructions. To remove the stand: 1. Place the monitor on a soft cloth or cushion. 2. Use a long and thin screwdriver to push the release latch. 3.
Operating your monitor Power on the monitor Press the button to turn on the monitor. Using the control buttons Use the control buttons at the bottom of the monitor to adjust the settings on your monitor. 1 2 3 4 1 2 3 4 5 Control buttons The following table describes the control buttons: Control Buttons 1 Description Use this button to choose from a list of preset modes.
2 Use the Brightness/Contrast key for direct access to the "Brightness" and "Contrast" control menu. Shortcut key/ Brightness/ Contrast 3 Menu 4 Use the Menu button to launch the On-Screen Display (OSD) and select the OSD Menu. See Accessing the OSD menu. Use this button to go back to the main menu or exit the OSD main menu. Exit 5 Use the Power button to turn the monitor on and off. Power (with power Solid white light indicates the monitor is On and fully functional.
OSD controls Use the buttons at the bottom of your monitor to adjust the image settings. 1 2 3 4 Contorl Buttons 1 Description Use the Up button to increase values or move up in a menu. Up 2 Use the Down button to decrease values or move down in a menu. Down 3 Use the OK button to confirm your selection in a menu. OK 4 Use the Back button to go back to the previous menu.
Using the on-screen display (OSD) menu Accessing the OSD menu NOTE: Any changes you make are automatically saved when you move to another menu, exit the OSD menu, or wait for the OSD menu to automatically close. 1. Press the button to display the OSD main menu. Main Menu for analog (VGA) input Dell SE2717H Energy Use Brightness / Contrast Auto Adjust Input Source Color Display Energy 75% 75% Menu Personalize Others Resolution: 1920x1080, 60Hz 2.
Icon Menu and Submenus Brightness/ Contrast Description Use this menu to activate brightness/contrast adjustment. Dell SE2717H Energy Use Brightness / Contrast Auto Adjust Input Source Color Display Energy 75% 75% Menu Personalize Others Resolution: 1920x1080, 60Hz Brightness Contrast Brightness adjusts the luminance of the backlight. Press the button to increase the brightness and press the button to decrease the brightness (min. 0 / max. 100).
Auto Adjust Use this key to activate automatic setup and adjust menu. Dell SE2717H Energy Use Brightness / Contrast Auto Adjust Press to adjust the screen automatically. Input Source Color Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz The following dialog appears on a black screen as the monitor self-adjusts to the current input: Auto Adjustment in Progress... Auto adjustment allows the monitor to self-adjust to the incoming video signal.
Input Source Use the input source menu to select between the different video signals that may be connected to your monitor. Dell SE2717H Energy Use Brightness / Contrast VGA Auto Adjust HDMI Input Source Auto Select Color Reset Input Source On Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz VGA HDMI Auto Select Reset Input Source Color Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source.
Preset Modes When you select preset modes, you can choose standard, comfortview, multmedia, movie, game, warm, cool, or custom color from the list. • Standard: Loads the monitor's default color settings. This is the default preset mode. • ComfortView: Decreases the level of blue light emitted from the screen to make viewing more comfortable for your eyes. NOTE: Optimize eye comfort with a flickerfree screen.
Press the and buttons to adjust the three colors (R, G, B) values and create your own preset color mode.
Hue Saturation Reset Color This feature can shift the color of the video image to green or purple. This is used to adjust the desired flesh tone color. Use or to adjust the hue from 0 to 100. Press to increase the green shade of the video image. Press to increase the purple shade of the video image. NOTE: Hue adjustment is available only when you select Movie or Game preset mode. This feature can adjust the color saturation of the video image. Use or to adjust the saturation from 0 to 100.
Display Use the display to adjust image. Dell SE2717H Energy Use Brightness / Contrast Aspect Ratio Wide 16:9 Auto Adjust Horizontal Position 50 Input Source Vertical Position 50 Color Sharpness 50 Display Pixel Clock 50 Energy Phase 0 Menu Dynamic Contrast Personalize Response Time Others Reset Display Normal Resolution: 1920x1080, 60Hz Aspect Ratio Horizontal Position Adjusts the image ratio to wide 16:9, 4:3 or 5:4. Use or the buttons to adjust image left and right.
Energy Dell SE2717H Energy Use Brightness / Contrast Power Button LED Auto Adjust Reset Energy On During Active Input Source Color Display Energy Menu Personalize Others Resolution: 1920x1080, 60Hz Power Button LED Reset Energy Allows you to set the power LED indicator on during active or off during active to save energy. Select this option to restore default Energy settings.
Menu Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen and so on.
Personalize Users can choose a feature from shortcut key 1, shortcut key 2, reset personalization, preset modes or Brightness/Contrast and set it as a shortcut key.
DDC/CI DDC/CI (display data channel/command interface) allows your monitor parameters (brightness, color balance and etc.) to be adjustable via the software on your computer. You can disable this feature by selecting disable. Enable this feature for best user experience and optimum performance of your monitor.
OSD warning messages When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled. Dell SE2717H To allow manual adjustment of brightness, the Dynamic Contrast will be switched off. Do you want to continue? No Yes When the monitor does not support a particular resolution mode, the following message is displayed: Dell SE2717H The current input timing is not supported by the monitor display.
If you press any button other than the power button, the following messages will appear depending on the selected input: Dell SE2717H ? No VGA signal from your device. Press any key on the keyboard or move the mouse to wake it up. If there is no display, press the monitor button again to select the correct input source. If VGA or HDMI cable is not connected, a floating dialog box as shown below appears. The monitor will enter Power Save Mode after 4 minutes if left at this state.
Setting up your monitor Setting the maximum resolution To set the maximum resolution for the monitor: In Windows 7, Windows 8, Windows 8.1 and Windows 10: 1. For Windows 8 and Windows 8.1, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen Resolution. 3. Click the Dropdown list of the Screen Resolution and select 1920 x 1080. 4. Click OK. If you do not see 1920 x 1080 as an option, you may need to update your graphics driver.
If you have a non Dell desktop, portable computer, or graphics card In Windows 7, Windows 8, Windows 8.1 and Windows 10: 1. For Windows 8 and Windows 8.1 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Personalization. 3. Click Change Display Settings. 4. Click Advanced Settings. 5. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 6.
Using tilt NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for set up instructions. Tilt NOTE: The stand is detached when the monitor is shipped from the factory.
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check if your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn off both your computer and the monitor. 2. Disconnect all video cables from the monitor.
Built-in diagnostics Your monitor has a built-in diagnostic tool that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. 1 2 3 4 5 To run the built-in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2.
Common problems The following table contains general information about common monitor problems you might encounter and the possible solutions: Common Symptoms No Video/Power LED off Possible Solutions • Ensure that the video cable connecting the monitor and the computer is properly connected and secure. • Verify that the power outlet is functioning properly using any other electrical equipment. • Ensure that the power button is pressed.
Brightness Problems Geometric Distortion Horizontal/Vertical Lines • Reset the monitor to Factory Settings (Factory Reset). • Adjust brightness & contrast controls via OSD. • Reset the monitor to Factory Settings (Factory Reset). • Adjust horizontal & vertical controls via OSD. • Reset the monitor to Factory Settings (Factory Reset). • Perform monitor self-test feature check and determine if these lines are also in self-test mode. • Check for bent or broken pins in the video cable connector.
Video Ghosting or Overshooting • Change the Response Time in the Display OSD to Fast or Normal depending on your application and usage. Product-specific problems Specific Symptoms Screen image is too small Cannot adjust the monitor with the buttons on the bottom of the panel Possible Solutions • Check the Aspect Ratio setting in the Display settings OSD. • Reset the monitor to Factory Settings (Factory Reset). • Turn Off the monitor, unplug the power cord, plug it back, and then turn On the monitor.
Appendix Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Product Information Guide. WARNING: The possible long-term effects of blue light emission from the monitor may cause personal injury such as digital eye strain, eye fatigue and damage to the eyes.
Contacting Dell For customers in the United States, call 800-WWW-DELL (800-999-3355). NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To get online Monitor support content: 1. Visit www.dell.com/support/monitors.
