Setup Guide

Next Generation KeySecure (k170v)
51 Enable OpenManage Secure Enterprise Key Manager (SEKM) on Dell EMC PowerEdge Servers
4.8 Ensure SEKM is enabled on iDRAC PERC
1. On the iDRAC GUI, click Storage  Overview.
2. Expand your storage controller and ensure the following statuses:
• Security Status = Security Key Assigned
• Encryption Mode = Secure Enterprise Key Manager
Ensure SEKM is enabled on iDRAC PERC
4.9 Viewing the iDRAC key ID on Next Generation KeySecure
View iDRAC key ID on next generation KeySecure
The SEKM setup operation is completed. You can now start creating locked RAID volumes and perform key
exchanges.