Dell™ Server Management Pack Suite Version 4.0 For Microsoft® System Center Operations Manager 2007 SP1/R2 and System Center Essentials 2007 SP1 使用者指南 w w w. d e l l . c o m | s u p p o r t . d e l l .
註解和警示 註: 「註」表示可以幫助您更有效地使用電腦的重要資訊。 警示: 「警示」表示可能導致硬體損壞或資料遺失,並告訴您如何避免發 生此類問題。 ____________________ 本文件中的資訊如有變更,恕不另行通知。 © 2009 Dell Inc. 版權所有,翻印必究。 未經 Dell Inc. 的書面許可,嚴格禁止以任何形式複製這些內容。 本文中使用的商標:Dell、DELL 標誌、PowerEdge、PowerVault® 和 OpenManage 是 Dell Inc. 的商標;Microsoft、Windows、Vista 和 Windows Server 是 Microsoft Corporation 在美國和其他 國家 / 地區的商標或註冊商標。 本文件中述及的其他商標和商業名稱可能指擁有相應商標和名稱的公司實體或其產品。Dell Inc.
目錄 1 簡介 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 存取管理組件和文件 . . . . . . . . . . . . . . . . . . 8 . . . . . 9 . . . . . . . . . . . . . . . . . 9 9 瞭解 Dell Server Management Pack Suite v4.0 . . . . . . . . . . . . . . . . . 可擴充管理組件和詳細管理組件比較 . . . . . 11 Dell 機箱管理控制器 (CMC) . . . . . . . . . . . 12 Dell 遠端存取控制器 (DRAC) . . . . . . . . . . . 12 支援的 Dell 裝置 . . . . . . . . . . . . . . . . . . . . 13 支援的作業系統 . . . . . . . . . . . . . . . . . . . . 13 . . . . . . . . .
正在將管理組件匯入 SCOM . . . . . . . . . . . . . . Dell Server Management Pack Suite v4.0 的匯入後工作 . . . . . . . . . . . . . . . . . . . Operations Manager 2007 SP1/R2 效能與擴充性的 Microsoft 指南 . . . . . . . . . . . . . . . . . . . 21 . . . . . . . . . . . . . . . . 22 . . . . . . . . . . . . . . . . . . . . . . 22 . . . . . . . . . . . . . . . . . . . . . . . 22 刪除管理組件 3 了解 Dell Server Management Pack Suite Operations . . . . . . . . . . . . . 23 探索與分組 . . . . . . . . . . . . . . . . . . . .
報告 . . . . . . . . . . . . . . . . . . . . . . . . . . . OpenManage Windows 事件記錄檔 BIOS 設定 40 . . . . . . . . . . . . . . . . . . . . . 41 韌體和驅動程式版本 RAID 設定 40 . . . . . . . . . . . . . . . . . . . . . . 41 . . . . . . . . . . . . . . . . . . . . . 41 . . . . . . 42 單位監視 . . . . . . . . . . . . . . . . . . . . . . 42 物件探索 . . . . . . . . . . . . . . . . . . . . . . 44 . . . . . . . . . . . . . . . . . . . . . . . . 44 自訂 Dell Server Management Pack Suite .
目錄
1 簡介 此文件適用於使用 Dell™ Server Management Pack Suite v4.0 來管理和監 控 Dell 系統的系統管理員。 透過 Dell™ Server Management Pack Suite v4.
四個管理組件、兩個公用程式、讀我檔案以及此使用者指南封裝於自解壓 縮執行檔 Dell_Server_Management_Pack_Suite_v4.0_A00.exe 中。可以從 Dell 支援網站 support.dell.com 上下載此 .exe 檔案。 Dell Server Management Pack Suite v4.0 新特色 Dell Server Management Pack Suite v4.0 透過提供用於管理 Dell 裝置的四 個不同管理組件來提供可擴充性以及對前代產品的效能改善。 • Dell Server Management Pack Suite v4.0 提供兩個管理組件和一個覆寫 公用程式來管理 Dell Windows 系統。 表 1-1. Dell Windows 系統的管理組件和公用程式 管理組件 / 公用程式名稱 檔案名稱 可擴充伺服器管理組件 Dell.WindowsServer.Scalable.mp 詳細的伺服器管理組件 Dell.WindowsServer.Detailed.mp 資訊報警覆寫公用程式 Dell.
有關此公用程式的詳細資訊,請參閱 「瞭解 Dell Server Management Pack Suite v4.0」。 • 除了 「圖表檢視」、「警示檢視」和 「狀況檢視」,在 SCOM 架構 中,Dell Server Management Pack Suite v4.0 提供的其他 Dell 特定使用 者介面檢視是 「效能和電源監控檢視」。此資料夾包含以圖形格式顯 示 Dell 系統計數器的檢視。 有關使用者介面檢視的詳細資訊,請參閱 「監視」。 先前版本 (Dell MP v3.1.1 以及更早版本 ) 只提供一個 Server、CMC 和 DRAC 的管理組件 - Dell.Connections.001.mp。Dell Server Management Pack Suite v4.0 透過獨立和分離的管理組件支援 Server、CMC 和 DRAC, 以確保效能改善。 瞭解 Dell Server Management Pack Suite v4.0 Dell 硬體群組定義 基本資料夾公用程式 Dell.Connections.HardwareLibrary.
• 詳細的伺服器管理組件 詳細的伺服器管理組件是可擴充的伺服器管理組件的延伸。此管理組 件將可擴充的伺服器管理組件中模組化的元件的詳細資料模組化。在 圖 1-1 中,底部矩形中包含的所有元件均被此管理組件模組化。例如, 透過此管理組件將記憶體單元模組化,此模組連接至可擴充的伺服器 管理組件中模組化的記憶體群組上。在預設情況下,資訊警示在此管 理組件中停用。 • 資訊報警覆寫公用程式 此公用程式透過覆寫來啟用定義為可擴充的伺服器管理組件一部分的 所有資訊警示。所以,在匯入此公用程式前,請確保匯入可擴充的伺 服器管理組件。 圖 1-1.
當您從詳細版本遷移至可擴充版本時,詳細的伺服器管理組件會從 SCOM 主控台移除。作為結果,您將無法檢視延伸元件的探索和屬性資 訊。 Dell Server Management Pack Suite v4.0 提供下列功能用於管理 Dell Windows 系統和頻外 Dell 裝置﹕ • 用於選取詳細的或可擴充的伺服器管理組件的選項,提供可擴充性 • 透過 Dell OpenManage™ Server Administrator 包含資訊警示或詳細監控 功能的選項 • Dell 大型和模組化系統探索和分組 • iDRAC、DRAC 和 IPMI 裝置的頻內屬性清單 • 使用 「效能和電源監控檢視」監控電源和溫度 • Dell 硬體的群組層級管理以獲得增強的擴充性,取代可擴充模式的例 項層級資料集合 可擴充管理組件和詳細管理組件比較 表 1-3 可幫助您瞭解可以使用可擴充管理組件和詳細管理組件的最佳環 境。 表 1-3.
表 1-3. 可擴充管理組件與詳細管理組件 ( 續 ) 屬性 可擴充管理組件 詳細管理組件 效能 使用可擴充管理組件進行 比可擴充管理組件慢。 清查和監控比詳細管理組 件快。 報告 在此管理組件中,只能使 在此管理組件中,可以使用 BIOS 用 OpenManage 設定、韌體和驅動程式版本以及 Windows 事件記錄檔報 RAID 設定報告。 告。 Dell 機箱管理控制器 (CMC) 此管理組件支援機箱管理控制器和 DRAC/MC 的探索、監控和警示處理。 此管理組件在 Dell Server Management Pack Suite v4.
註:由於 iDRAC 硬體限制,Dell 遠端存取控制器管理組件不支援 xx0x iDRAC 模組化控制器頻外系統的探索。要管理 iDRAC xx0x 模組化控制器,使用詳細 伺服器管理組件或可擴充伺服器管理組件可在頻內作為伺服器目錄的一部分 探索 xx0x iDRAC。 支援的 Dell 裝置 Dell Server Management Pack Suite v4.
• 《Dell Integrated Remote Access Controller 使用者指南》提供有關設定和 使用 iDRAC 的詳細資訊。 • 《Dell Chassis Management Controller 使用者指南》提供有關安裝、設 定和使用 CMC 的詳細資訊。 • 《Dell OpenManage 安裝和安全性使用者指南》針對每個支援的作業系 統提供詳細的安裝程序以及安裝、升級和解除安裝 Server Administrator 的逐步說明。 • 《Dell OpenManage 軟體快速安裝指南》提供您可在管理站 ( 主控台 ) 和受管理系統上安裝的應用程式的概覽。本文件還提供在執行支援作 業系統的系統上安裝您的主控台和受管理應用程式的程序。 • 《Dell OpenManage Server Administrator 相容性指南》提供有關 Server Administrator 在執行支援作業系統的各種硬體平台 ( 或系統 ) 上安裝和 作業的相容性資訊。 • 《Dell OpenManage Server Administrator CIM 參考指南》描述了通用資 訊模型 (
• 《Dell Life Cycle Controller 使用者指南》提供有關設定和使用壽命週期 控制器以在整個系統壽命週期內執行系統和儲存管理工作的資訊。您 可以使用壽命週期控制器來部署作業系統、設定備援獨立磁碟陣列 (RAID) 以及執行診斷以驗證系統和連接的硬體。壽命週期控制器可在 開機順序中啟動,它可獨立於作業系統進行工作。 《Dell 系統管理工具與文件》 DVD 包含 Server Administrator 的讀我檔案 以及 DVD 上其他系統管理軟體應用程式的讀我檔案。 獲得技術援助 如果您不理解本指南中描述的程序,或者您的產品不能正常執行,可隨時 獲取其他類型的說明。欲知詳情,請參閱您系統的 《硬體擁有者手冊》 中的 「獲取說明」。 此外,Dell 企業培訓和認證目前已可使用,請參閱 www.dell.
簡介
2 開始使用 管理站要求 通用要求 • 為了在您網路上探索 Windows 系統的以及透過 Operations Console 安 裝 SCOM 代理程式,所有受管理系統都應該具有可以從管理站偵測的 有效且完整的格式網域名稱 (FQDN)。 • 對於 DRAC 4、DRAC 5、iDRAC 6、DRAC/MC 和 CMC,應該執行頻 外網路裝置探索,並且必須啟用 SNMP。 Windows Server • 如果 SCOM 管理伺服器動作帳戶對所有 Dell 受管理系統具有正常的使 用者權限但具有縮減的功能集,Dell Server Management Pack Suite v4.0 仍起作用。管理伺服器動作帳戶需要列出下列權限才能列出其他 功能: 表 2-1.
受管理系統的要求 以下是 Dell 系統的受管理系統要求﹕ • 安裝 Dell OpenManage™ Server Administrator ( 包括 Server Administrator Storage Management Service)。 • Dell 建議您安裝最新的 Dell OpenManage Server Administrator 6.1。 • 最低支援版本是 Dell OpenManage Server Administrator 5.3 及以上 版本。 您可以從 Dell 支援網站 support.dell.com 上下載最新版本的 Server Administrator。 註:若系統具有比 5.
4 管理伺服器動作帳戶使用者不再是進階使用者 / 管理員使用者帳戶後, 請在管理站上匯入 Dell Management Pack 。 5 在管理組件再次探索到受管理系統之前,請稍候 ( 這將取決於探索週 期時間 )。 正在將管理組件匯入 SCOM 匯入管理組件或公用程式時,確保﹕ • 在匯入四個獨立管理組件的任何一個之前匯入基礎資料夾公用程式。 • 在匯入詳細的伺服器管理組件或資訊報警覆寫公用程式之前匯入可擴 充的伺服器管理組件。 要匯入管理組件或公用程式,請使用 「SCOM 匯入管理組件」精靈: 1 從 Dell 支援網站 support.dell.com 上下載管理組件或公用程式。 此檔案是自解壓縮 .exe 檔案— Dell_Server_Management_Pack_Suite_v4.0_A00.exe。 2 將下載的檔案複製到您本機系統硬碟中的目的地目錄。 3 打開 Dell_Server_Management_Pack_Suite_v4.0_A00.
Dell Server Management Pack Suite v4.0 的匯入後工作 應在 SCOM 管理站上安裝 BMC Management Utility (BMU) 2.0 或更新版 本。 可以從 Dell 支援網站 support.dell.com 上下載最新的 BMC Management Utility。 進階電源控制和 LED 識別工作使用預設的 BMC 憑證,包括預設的英文 作業系統 BMU 安裝路徑 (C:\Program Files\Dell\SysMgt\bmc),該路徑無 法修改。 對於進階電源控制和 LED 識別工作,如果您的系統具有不同的 BMC 憑 證,或者如果 BMU 安裝在 64 位程式檔案路徑,或管理站的非預設 BMU 安裝路徑中,或者如果本地的程式檔案路徑不同於英文作業系統的 BMU 安裝路徑,您將需要在操作員主控台上安裝 BMU 2.
• 輸入 -U -P -k • 使用以下其中一個選項取代 ﹕ • power status ( 檢視電源狀態工作 ) • power on ( 開啟電源工作 ) • power soft ( 溫和關閉電源工作 ) • power off ( 強制關閉電源工作 ) • power cycle ( 重新啟動電源工作 ) • power reset ( 電源重設 工作 ) • identify on ( 開啟 LED 識別工作 ) • identify off ( 關閉 LED 識別工作 ) 以下為命令列參數輸入樣本﹕ -I lan -H $Target/Property[Type= "Dell.WindowsServer.Server40025!DellServer.
註:確保在 Operations Manager 資料倉儲和 / 或資料庫中啟用了 「自動成 長」選項。 從以前的管理組件升級 不支援從以前的管理組件升級。您必須刪除先前對應版本的 Dell Server MP (3.0、3.1 或 3.1.1),然後在 Systems Center Operations Manager 上安 裝 Dell Server Management Pack Suite v4.0。有關匯入 Dell Server Management Pack Suite v4.0 步驟的資訊,請參閱 「開始使用」。 註:在匯入作為 Dell Server Management Pack Suite v4.0 一部分的任一管理組 件之前,確保刪除 Dell Server Management Pack 3.x (Dell.Connections.001.
3 了解 Dell Server Management Pack Suite Operations 探索與分組 Dell Windows 系統是透過 SCOM Agent Management 基礎結構探索的。 未安裝 Dell OpenManage™ Server Administrator、具有無回應檢測服務或 具有 5.3 之前版本 Server Administrator 的 Dell 系已統分組為 Dell 「未受管 理」。 Windows Servers • 探索和監控 Dell® PowerEdge® 和 PowerVault® 系統,並對執行 OpenManage Server Administrator (5.3 至 6.
註:由於 iDRAC 硬體限制,Dell Remote Access Controller 管理組件不支援 xx0x iDRAC 模組化控制器頻外系統的探索。要管理 iDRAC xx0x 模組化控制 器,使用詳細伺服器管理組件或可擴充伺服器管理組件可在頻內作為伺服器 目錄的一部分探索 xx0x iDRAC。 警示與設陷 • 為 Dell PowerEdge 系統顯示來自 Dell OpenManage Server Administrator 的事件警示 • 提供一個用於包含資訊警示的選項 • 為 DRAC 4、DRAC 5、iDRAC 6、DRAC/MC 及 CMC 提供設陷支援 • 為 Dell 系統提供平台事件設陷 (PET) 支援 工作 • 為伺服器管理組件提供下列工作: – 啟動 Server Administrator – 啟動 Dell Modular Chassis Remote Access 主控台 – 啟動 InBand Dell RemoteAccess 主控台 – 清除 Dell 系統的 ESM 記錄 • 為 Remote Access 管理組件提供以下工作:
• 為帶有 BMC 的 Dell 系統提供智慧型平台管理介面 (IPMI) 工作: – 檢視電源狀態 – 電源開啟 – 強制關閉電源 – 溫和關閉電源 – 重新啟動電源 – 電源重設 – 開啟 LED 識別 – 關閉 LED 識別 報告 提供下列報告: • OpenManage Windows 事件記錄檔 • Dell Server BIOS、韌體和 RAID 設定報告 自訂 允許您自訂和設定用於探索和監控的 Dell 裝置。 Web 主控台 Web 主控台伺服器使您能夠使用瀏覽器而非 Operations Manager 2007 主 控台來監控並管理帶 Dell Server Management Pack Suite 的 Dell 裝置。您 無須安裝 Operations 主控台,即可使用 Web 主控台伺服器。使用 Web 主 控台具有下列限制: • 僅提供對所有管理組件的監視功能 • 僅顯示伺服器管理組件的清除 ESM 記錄工作 了解 Dell Server Management Pack Suite Operations 25
• 對於 DRAC 和 CMC 管理組件: • 主控台啟動工作無效 • 管理、製作和報告無效 • 個人化視圖無效 • 即使匯入 Information-On 覆寫公用程式後,資訊警示仍廢止 • 僅前 200 個警示顯示在 「警示檢視」中 探索 要探索 Dell 裝置,這些裝置必須出現在 Operations 主控台的 「管理」部 分下的 「受管理的代理程式」檢視中。 若要將 Dell 系統加入到 「受管理的代理程式」清單中: 1 透過具有 SCOM 管理員角色的帳戶登入系統,以進入 SCOM 管理群 組。 2 在 Operations 主控台中,按一下 「管理」。 3 在導覽窗格底部,按一下 「探索精靈」。將顯示 「簡介」螢幕。 4 在讀取 「簡介」螢幕上的簡介後,按一下 「下一步」。 5 要探索 Dell 模組化和大型系統,選取 「自動電腦探索」,然後按一下 「下一步」。 a 在 「管理員帳戶」螢幕上提供使用者帳戶詳細資料,然後按一下 「探索」。將顯示 「探索進度」頁面。 b 在 「選取要管理的物件」頁面上,選取要管理的裝置,然後按一 下 「下一步」。 c 在 「摘要」螢幕上
3 鍵入您要掃描的 IP 位址範圍的 「開始」和 「結束」位址,鍵入 SNMP 社群並選取 SNMP 版本。 4 按一下 「探索」。將顯示 「探索進度」頁面。 5 在 「選取要管理的物件」頁面上,選取要管理的裝置,然後按一下 「下一步」。 6 按一下 「完成」。 註:您可以從 Operations 主控台的 「製作」窗格覆寫探索間隔。若要覆寫 iDRAC 6 模組化的探索間隔,請同時修改 DRAC5/iDRAC 探索和 Dell 整合式遠 端存取 ( 模組化 ) 探索的探索間隔時段。 監視 透過 Dell Server Management Pack Suite v4.
聯的警示時,「啟動 Dell CMC 主控台」將顯示在 「動作」窗格中。當 與所選 DRAC 裝置關聯的 「警示檢視」中列出警示時,「啟動 Dell 遠端 存取主控台」將顯示在 「動作」窗格中。 圖表檢視 此檢視可用於管理 Dell Windows 系統、Dell CMC 和 DRAC/MC 及 Dell 遠端存取裝置。在 Operations 主控台的 「監視」部分,「Dell」 → 「圖 表檢視」為 SCOM 管理的網路上的所有 Dell 裝置提供分層的圖形化表 示。Dell Server Management Pack Suite v4.
所有群組圖示 圖 3-1.
Dell 伺服器例項圖示 圖 3-2.
Dell 模組化伺服器圖示 圖 3-3.
Dell 大型伺服器圖示 圖 3-4.
機箱管理控制器群組圖示 圖 3-5. 機箱管理控制器群組圖示 機箱管理控制器群組圖示為所有 Dell CMC、DRAC/MC 裝置提供圖形化 表示。從圖示中選取一個元件,可在 「詳細資料檢視」窗格中檢視其詳 細資料。 遠端存取控制器群組圖示 圖 3-6.
狀態元件和重要性等級 表 3-1.
效能和電源監控檢視 此檢視僅可用於管理 Dell Windows 系統。在 Operations 主控台中, 「Dell」 → 「效能和電源監控檢視」顯示作為效能資料收集自 Dell 系統 的電源管理資訊。電源監控包含以下參數: • 每個電源的電流量 • 耗電量 ( 瓦特 ) • 耗電量 (BTU/ 小時 ) • 能源消耗 • 最大功率 • 峰值電流 • 環境溫度 註:電源監控適用於具有電源監控功能的特定屬性的特定 Dell 系統。 從各效能檢視中選取計數器 ( 圖例之下 ),並選取所需值的時間範圍。為 每個系統收集的資料以圖示格式表示。 單位監視監控兩個連續週期內的效能計數器,以檢查其是否超過臨界值。 如果超過臨界值,伺服器會變更狀態,並廠生警示。依預設,此單位監視 為停用狀態。您可以透過 Operations 主控台的 「製作」窗格,覆寫 ( 啟 用和修改 ) 「Dell Windows 伺服器物件監視」下的臨界值。 若要獲得有關效能資訊收集的更多資訊,請參閱 「效能集合規則」。 工作 工作可在 Operations 主控台的 「動作」窗格中使用。當您從任一個 Dell 圖表
表 3-2.
1 在 Operations 主控台中,導覽至圖表檢視。 2 展開圖表,並選取需要的 Dell 系統。 3 在 「動作」窗格中的 「Dell Windows 伺服器工作」下,按一下 「清 除 ESM 記錄」。將顯示 「執行工作」視窗。 4 按一下 「執行」,以清除所選裝置的 ESM 記錄。 執行清除 ESM 記錄工作時,工作執行螢幕顯示工作起始結果,不會顯示 工作的執行結果。例如,即使 ESM 記錄未清除,但執行螢幕仍會顯示成 功結果。這表示清除 ESM 記錄工作啟動是成功的。 啟動 Server Administrator 1 在 Operations 主控台中,導覽至 Dell 圖表檢視。 2 展開圖表,並選取需要的 Dell 系統。 3 在 「動作」窗格中的 「Dell Windows 伺服器工作」下,按一下 「啟 動 Server Administrator」。 註:您可以從圖表檢視、狀態檢視或警示檢視執行啟動 Server Administrator 和清除 ESM 記錄的工作。 註:Dell 管理組件工作啟動 Internet Explorer 中的遠端主控台。 檢視電源狀態 檢查系統的整體電
強制關閉電源 關閉系統電源,但不關閉作業系統。您可以使用此工作關閉伺服器電源。 1 在 Operations 主控台中,導覽至 Dell 圖表檢視。 2 展開並選取需要的 Dell 系統。 3 在 「動作」窗格中,選取 「Dell Windows 伺服器工作」 → 「強制關 閉電源」。 溫和關閉電源 先關閉作業系統,再關閉系統電源。您可以使用此工作關閉伺服器電源。 1 在 Operations 主控台中,導覽至 Dell 圖表檢視。 2 展開並選取需要的 Dell 系統。 3 在 「動作」窗格中,選取 「Dell Windows 伺服器工作」 → 「溫和關 閉電源」。 電源開啟 開啟系統電源。該選項僅在系統電源已關閉時適用。您可以使用此工作開 啟伺服器電源。 1 在 Operations 主控台中,導覽至 Dell 圖表檢視。 2 展開並選取需要的 Dell 系統。 3 在 「動作」窗格中,選取 「Dell Windows 伺服器工作」 → 「開啟電 源」。 電源重設 關閉系統電源,然後再開啟。您可以使用此工作重設伺服器電源。 1 在 Operations 主控台中,導覽至 Dell 圖表檢視。 2
3 在 「動作」窗格中,選取 「Dell Windows 伺服器工作」 → 「關閉 LED 識別」。 開啟 LED 識別 開啟所選系統的 LED 識別,並持續 255 秒。您可以使用此工作開啟系統 的 LED 識別。 1 在 Operations 主控台中,導覽至 Dell 圖表檢視。 2 展開並選取需要的 Dell 系統。 3 在 「動作」窗格中,選取 「Dell Windows 伺服器工作」 → 「開啟 LED 識別」。 Dell 遠端存取控制器 (DRAC) 工作 DRAC 4/ DRAC 5/ iDRAC 6 如果您的 Dell 系統上安裝了 DRAC,您可以使用此工作啟動 Dell 遠端存 取主控台。 1 在 Operations 主控台中,導覽至 Dell 圖表檢視、狀態檢視或警示檢 視。 2 展開並選取需要的 DRAC 系統 3 在 「動作」窗格中,選取 「SNMP 網路裝置工作」 → 「啟動 Dell RemoteAccess Console」。 Dell 機箱管理控制器 (CMC) 工作 CMC 您可以使用此工作啟動 CMC 主控台。 1 在 Operations 主控台中,導覽至
1 在 Operations 主控台中,導覽至 Dell 圖表檢視、狀態檢視或警示檢 視。 2 選取 DRAC/MC 裝置。 在 「動作」窗格中,選取 「SNMP 網路裝置工作」 → 「啟動 Dell 模組 化機箱遠端存取主控台」。 報告 Dell Server Management Pack Suite v4.
BIOS 設定 要建立 BIOS 設定報告,請按照下列步驟執行: 1 按一下 「BIOS 設定」。在 「動作」窗格中,按一下 「開啟」。 2 選取一個您要產生報告的時段。 3 按一下 「新增物件」或 「新增群組」。 4 按一下 「搜尋」,以搜尋物件或群組。選取新增 ( 您可以新增多個物件 )。您將在所選的物件窗格中發現所選物件。 5 選取所需的 「屬性」。 6 按一下 「執行」。BIOS 設定報告將產生。 註:僅當 BMU 安裝在管理伺服器上時,您才可以建立 BMC 報告。 韌體和驅動程式版本 要建立韌體和驅動程式版本,請執行下列步驟: 1 按一下 「韌體和驅動程式版本」。在 「動作」窗格中,按一下 「開 啟」。 2 選取一個您要產生報告的時段。 3 按一下 「新增物件」或 「新增群組」。 4 按一下 「搜尋」,以搜尋物件或群組。選取新增 ( 您可以新增多個物 件 )。您將在所選的物件窗格中發現所選物件。 5 選取所需的 「屬性」。 6 按一下 「執行」。韌體和驅動程式版本報告將生成。 RAID 設定 1 按一下 「RAID 設定」。在 「動作」窗格中,按一下 「開啟」。 2 選取一個您要產生報告的時段。
自訂 Dell Server Management Pack Suite Dell Server Management Pack Suite v4.0 允許您自訂 Dell 裝置的探索、監控 和事件處理。您可以自訂 Dell Management Pack 的下列元件: • 顯示器:用於評估受監視物件可能發生的各種狀況的顯示器。此評估 結果可決定目標的健康狀態以及產生的警示。 • 物件探索:用於尋找網路上需要監控的物件。 • 規則:用於收集資料,例如受管理物件產生的事件。 註:請參閱 Microsoft System Center Operations Manager 2007 SP1/ R2 文件,獲 得更多資訊。 單位監視 您可以使用覆寫自訂 Dell Server Management Pack Suite v4.
表 3-3.
物件探索 您可以使用覆寫自訂下列 Dell Management Pack 探索參數: 啟用:讓您啟用或停用探索。您可以選取 「覆寫設定」為 True 或 False。 間隔 ( 秒 ):Dell Management Pack 探索元件例項及 Dell 裝置屬性的頻率 ( 以秒為單位 )。此屬性的預設值為 24 小時 ( 一天 )。 表 3-4.
• 重要性 = 實際事件的重要性 • 資料提供者 = Windows 系統事件紀錄檔 儲存管理 Server Administrator 儲存管理服務的所有資訊、警告和重要事件都有相應 的事件處理規則。 所有這些規則都是基於下列標準進行處理: • 來源名稱 = 「Server Administrator」 • 事件 ID = Server Administrator 儲存管理服務事件的實際事件 ID • 重要性 = 實際事件的重要性 • 資料提供者 = Windows 系統事件紀錄檔 DRAC / CMC DRAC/CMC 的所有資訊、警告和重要 SNMP 設陷都有相應的 SNMP 設 陷規則。 所有這些規則都是基於下列標準進行處理: • 來源名稱 = 「DRAC/CMC 名稱 /ip」 • OID = DRAC SNMP 設陷事件的實際設陷 ID • 重要性 = 實際事件的重要性 • 資料提供者 = SNMP 設陷 效能集合規則 有七個效能集合規則用於收集下列參數的資訊: • 每個電源的電流量 • 耗電量 ( 瓦特 ) • 耗電量 (BTU/ 小時 )
在 Operations 主控台中,「Dell」 → 「效能和電源監控檢視」顯示收集 自 Dell 系統的效能資訊。此功能在安裝了可擴充伺服器管理組件的情況 下可用。依預設,此功能為停用。要啟用此功能,請執行下列步驟: 1 在 Operations 主控台中,開啟 「製作」窗格。 2 選取 「規則」。 3 以滑鼠右鍵按一下您要啟用的規則。 例如,要啟用收集有關 Dell 系統能源耗用的資訊,請選取 「Dell 伺服 器能源耗用收集」規則。 4 選取 「覆寫」 → 「覆寫規則」 → 「對於該類所有物件」 5 選取 「覆寫」,並將 「覆寫值」設為 True。 6 按一下 「套用」。 或者,當匯入詳細伺服器管理組件時,這些停用的效能集合規則將在預設 情況下啟用。 46 了解 Dell Server Management Pack Suite Operations
A 附錄 A- SCOM 2007 SP1/SCE SP1 的已知問題 這些是 SCOM 2007 SP1/R2 中的已知問題: 1 Dell™ Management Pack 圖表檢視間歇顯示空白螢幕。 SCOM 2007 SP1 中的圖表檢視間歇顯示空白螢幕。即使在更新螢幕數 次後,實際的圖表檢視仍不出現。 2 WMI 服務在受管理系統中停止時,Dell 系統從 SCOM 主控台消失。 當 SCOM 已經探索到圖表檢視中顯示的 Windows 系統時,隨著 WMI 服務在此系統中停止,探索到的 Windows 系統從 SCOM 主控台消失。 3 Dell 警示未根據年齡排序 檢查出現此問題的機器上的登錄。這可能是排序標幟設定為 「錯誤」 的無用檢視定義。在某些情況下,當您將變更的 MP 匯入排序標幟時, 它可能不會在登錄中更新。如果您刪除登錄中檢視的設定,當您再次 導覽此檢視時,它們不會從新的 MP 中重新建立。您也可以在登錄中 編輯檢視的排序標幟。 登錄編輯: HKEY_CURRENT_USER\Software\Microsoft\Microsoft Operations Manager\3.0\
Microsoft 支援網站 support.microsoft.com 上的 Microsoft KB975057 可 解決此問題。 已知限制 SCOM / SCE 對於所有 Dell 硬體裝置,路徑名稱屬性值並不是唯一的和正確的。 基於代理程式探索到的裝置和基於 SNMP 探索到的裝置的路徑名稱屬性 值格式不同。這取決於 SCOM 2007 的設計。 SCE 在圖表檢視中,對於 Dell 網路裝置 (DRAC/CMC),您可以檢視 Dell 網路 裝置物件下的 SNMP 介面物件。這可在 Microsoft 管理組件 Microsoft.SystemCenter.NetworkDevice.Monitoring.Library.mp 中執行。 SCOM / SCE 和 Dell Server Management Pack Suite v4.
• 在 Dell 網路裝置的圖表檢視中,會顯示 Dell DRAC 和 CMC 物件的基 本屬性。您可以透過按一下 「狀態檢視」中的物件來檢視屬性的詳細 集合。 • 感應器下的入侵單位監視狀態只針對機箱,並不包含擋板入侵的健全 狀況。 SCOM 2007 SP1 的 Microsoft® 修補程式 1 SCOM 主控台產生一個執行時間錯誤。 偶爾出現帶有下列訊息的執行時間錯誤 (Microsoft Visual C++ Runtime Library) - 執行時間錯誤! Program: C:\Program Fil... R6025 - 純 虛擬函數引用。我們在開發 / 測試設定中觀察到多個視窗。Microsoft 支援網站 support.microsoft.
您可能遇到過下列一種或多種情況﹕ • Web 主控台未打開。 • 「我的工作區」頁面未顯示。 • 「效能和電源監控檢視」未顯示。 Microsoft 支援網站 support.microsoft.com 上的 Microsoft KB954049 可 解決此問題。 5 在您將執行 Operations Manager Management Server 角色的電腦從 Windows Server 2003 升級到 Windows Server 2008 之後,未註冊 Operations Manager 效能計數器。 Microsoft 支援網站 support.microsoft.
詞彙表 下表定義或確認本文件中使用的技術術語、縮寫和 簡寫用語。 BMC 基礎板管理控制器的縮寫,此控制器在 IPMI 結構中提供智慧功能。 CMC 機箱管理控制器的簡寫。 DRAC Dell 遠端存取控制器的縮寫。 DRAC/MC DRAC / 模組化機箱 EMM 機櫃管理模組 FQDN 完整網域名稱的縮寫。FQDN 是人們可讀取的名稱,此名稱與電腦、路由 器或其他網路設備上可以找到的網路介面的 TCP/IP 位址相對應。它包括主 機名稱和網域名稱。 iDRAC 整合式 Dell 遠端存取控制器的縮寫。 智慧型平台管理介面 (IPMI) 定義電腦硬體與韌體的一組通用介面的規範。它用來監視系統健康狀況以及 管理系統。 頻內 DRAC 是指在主要 NIC IP 上透過 Server OS 和 Dell 儀器探索的 DRAC 物件。 受管理系統 受管理系統是使用 Server Administrator 進行監視和管理的所有系統。可透過 支援的 Web 瀏覽器本地或遠端管理執行 Server Administrator 的系統。 詞彙表 51
管理站 管理站可以是用來在中央位置遠端管理一個或多個受管理系統的任何基於 Microsoft® Windows 的電腦 ( 筆記型電腦、桌上型電腦或伺服器 ) 。 模組化系統 可以包括多個伺服器模組的系統。每個伺服器模組都充當單個系統。若要充 當系統,請將伺服器模組插入包括電源、風扇、系統管理模組並至少含有一 個網路交換器模組的機箱中。在機箱中,伺服器模組共用電源、風扇、系統 管理模組以及網路交換器模組。請參閱 「伺服器模組」。 大型系統 獨立的或立式伺服器,與模組系統不同,包含單個伺服器模組。 頻外 DRAC/MC 指直接透過 DRAC 卡的 NIC IP 探索的 DRAC 物件。 伺服器模組 充當單個系統的模組系統元件。若要充當系統,請將伺服器模組插入包括電 源、風扇、系統管理模組並至少含有一個網路交換器模組的機箱中。在機箱 中,伺服器模組共用電源、風扇、系統管理模組以及網路交換器模組。請參 閱模組化系統。 狀況 指可擁有多種狀況的物件的狀況。例如,物件可能處於 「未就緒」狀況。 狀態 指物件的健康狀況和功能。例如,如果溫度探測計正在測量可接受的溫度, 探測計可能就處於正常狀態。如果探測計開
索引 D 匯入後工作:Dell 伺服器 MP, 20 Dell 工作:CMC, 39 匯入後工作:Dell 伺服器和印表 機 MP, 20 Dell 工作:DRAC, 39 Dell 工作:清除 ESM 紀錄 , 36 管理站要求 , 17 Dell 裝置:探索 , 26 說明元件和嚴重性等級 , 34 Dell 管理組件:升級 , 22 技術援助 , 15 Dell 管理組件:功能 , 8 使用者角色 , 22 Dell 管理組件:刪除 , 22 探索 Dell 裝置 , 26 報告 , 40 支援的 Dell 裝置 , 13 支援的 DRAC 和 CMC 裝置韌體 版本 , 13 支援的作業系統 , 13 伺服器管理組件:工作 , 35 伺服器管理組件:發現 , 26 伺服器管理組件:監控 , 27 效能和電源監控檢視 , 35 效能集合規則 , 45 規則 , 44 規則:DRAC/CMC, 45 規則:儲存管理 , 45 索引 53
索引