User's Manual

Using Dell PRO Pack 39
2292 Communication
with the
enclosure has
been lost
Critical The controller has lost
communication with
an enclosure
management module
(EMM). The cables
may be loose or
defective.
Restrict and Migrate
2293 EMM
(Enclosure
Management
Module) Failure
Error The failure may be
caused by a loss of
power to the EMM.
Restrict and Migrate
2298 The enclosure
has a bad sensor
Warning The enclosure has a
bad sensor. The
enclosure sensors
monitor the fan speeds,
temperature probes,
and so on.
Restrict
2299 Bad PHY Critical There is a problem with
a physical connection
or PHY.
Restrict
2300 Unstable
Enclosure
Failure
Critical The controller is not
receiving a consistent
response from the
enclosure.
Restrict and Migrate
2301 Enclosure
Hardware Error
Critical The enclosure or an
enclosure component is
in a Failed or Degraded
state.
Restrict and Migrate
Table 3-1. Alert Cause and Recovery Action
(continued)
Dell
Event
ID
Alert Description
in SCOM/ SCE &
PRO Tip in
SCVMM
Severity Alert Cause Dell PRO Tip
Recommended
Remedial Action
book.book Page 39 Thursday, December 10, 2009 12:36 PM