User's Manual

About GUI Mode 13
Fixing the Software Prerequisite Failure
When you launch Dell OpenManage Server Update Utility (SUU) in the
GUI mode and the prerequisites check for the software component fails, you
must install the Dell OpenManage component version 4.3 or later before
proceeding with the upgrade, downgrade, or update of the components.
Fixing the Hardware Prerequisite Failure
When you launch Dell OpenManage Server Update Utility (SUU) in the
GUI mode and the prerequisites check for the hardware component fails, you
must install the hardware prerequisites before proceeding with the upgrade,
downgrade, or update of the components.
To install the hardware prerequisites:
1
Use the Prerequisites media to bring your system up to meet prerequisite
levels.
NOTE: Set the boot order in your system BIOS such that the media drive is
placed ahead of the system hard drive.
Enter the result of your step here (optional).
2 Boot the system that fails to meet the prerequisites with the Prerequisites
media.
NOTE: An additional reboot may be required to complete the prerequisite
update. Do not remove the media until the information on the screen prompts
you to do so.
3 When prompted, replace the Prerequisites media with the Dell Server
Updates
media and reboot the system.
Creating a Prerequisites media
To create the prerequisites media:
1
Go to support.dell.com .
2 Under Support for Enterprise IT, click Start Here .
3 Click Drivers & Downloads .
A5_bk0.book Page 13 Friday, February 25, 2011 2:47 PM