User's Manual

About GUI Mode 19
Updating System Components
SUU compares the components installed on your system with the component
versions available in the repository. If some system components are newer
than the repository version and vice versa, SUU enables the Update button
on the upper right corner of the Comparison Report.
To upgrade and downgrade components in a single session:
1
Select Enable System Set Update .
SUU disables
Enable Downgrade and Upgrade changes to Update . All the
components that can be updated are selected in the Comparison Report.
2 Click the Update button.
The
Confirm Update dialog box with a list of components to be updated
is displayed.
3 Click Yes to proceed with the update or No to cancel the update.
If you click
Yes , SUU displays the Update dialog box that shows the
progress of the update.
4 Click OK when the update is complete.
The status of the update is reflected in the Comparison Report.
Updating Failures
While updating the system components, if a particular component fails to get
updated, you can choose to continue or stop updating the other components.
If you select Stop on Update Failures, SUU does not update the other
components when it encounters a failed update.
NOTE: Stop on Update Failures is enabled only if you have selected more than one
component for an update.
A5_bk0.book Page 19 Friday, February 25, 2011 2:47 PM