White Papers

(A) Viewing network settings
11 MX7000 Deployment of Management Module Network using the LCD control panel | Document
ID
Disabling IPv4
Figure 7 - Disabling IPv4
Press the IPv4 button (Figure-7 item 1), then press the “Disable” button (Figure-7 item 2) and you will be
asked to confirm (Figure-7 item 3) that you intend to disable IPv4 network. Pressing “Yes” in the confirmation
page initiates the Disable configuration process.
For a short period of time, you may see the Save in-progress icon (Figure-7 item 4). When the configuration
process is complete, you will see the “Success” menu (Figure-7 item 5). Press “Close” button to conclude the
configuration.
NOTE: Although the configuration has concluded, the information in the LCD may take a few seconds to
reflect the changes.