White Papers

(A) Viewing network settings

12 MX7000 Deployment of Management Module Network using the LCD control panel | Document

C Configuring IPv6 network

C.1 Start IPv6 network changes

The default setting of IPv6 network is “Disabled”. You may configure the setting between Static IP, Auto-

Configuration or Disable the IPv6 interface.

Configuring IPv6 network settings

To configure IPv6 settings, start at the Main menu (Figure-8 item 1) and press the Settings button, then press

the Network Settings (Figure-8 item 2), then press the Edit button (Figure-8 item 3), then press the IPv6

button (Figure-8 item 4) to show the Edit selection (Figure-8 item 5) in the next menu. Each selection in the

Edit menu is discussed in the next sections.

C.2 (E) Configure IPv6 network to Static

Configuration of IPv6 static addresses requires a longer user input than the IPv4 octet address. Due to the

limited LCD screen size, the numeric dial for digit selection of IPv6 address does not fit the LCD screen.