White Papers

(A) Viewing network settings
13 MX7000 Deployment of Management Module Network using the LCD control panel | Document
ID
Configure IPv6 setting to Static
Following the steps to attempt to configure static IPv6 (Figure-9 item 1), selecting Static IP (Figure-9 item 2)
the LCD will show you an Error (Figure-9 item 3). This is expected.
To configure IPv6 to Static setting, refer to OpenManage Enterprise Modular User’s Guide or go to the GUI:
Home > Settings > Network > IPv6 Settings. You can also use OpenManage Mobile app.
C.3 (F) Configure IPv6 network to Auto-Configuration
To change the IPv6 configuration to Auto-Configuration, start from the Main menu described in the “Start IPv6
network changes” section.
Configure IPv6 setting to Auto-Configuration