White Papers

(A) Viewing network settings

15 MX7000 Deployment of Management Module Network using the LCD control panel | Document

D Troubleshooting

D.1 I don’t see the “Edit” button in the Network Setting menu.

If you don’t see the “Edit” button in the Network Settings menu, the LCD access setting may be set to “View

only”. For further information, check the OpenManage Enterprise Modular User’s Guide or go to the GUI:

Home > Settings > Local Access Configuration > LCD.

D.2 I don’t see any network information at all.

D.3 If you don’t see any network information at all, the LCD access

setting may be set to “Disabled”. For further information, check the

OpenManage Enterprise Modular User’s Guide or go to the GUI:

Home > Settings > Local Access Configuration > LCD.

D.4 I see an “Error” menu at the end of configuration.

If you see an “Error” menu at the end of configuration, instead of “Success”, check the Hardware Log in OME-

M for more information about the error.