White Papers

(A) Viewing network settings
8 MX7000 Deployment of Management Module Network using the LCD control panel | Document
ID
B Configuring IPv4 network
B.1 Start IPv4 network changes
The default setting of IPv4 network is DHCP. You may configure the setting between Static IP, DHCP or
Disable the IPv4 interface.
Configuring IPv4 network settings
To configure IPv4 settings, start at the Main menu (Figure-4 item 1) and press the Settings button, then press
the Network Settings (Figure-4 item 2), then press the Edit button (Figure-4 item 3), then press the IPv4
button
(Figure-4 item 4) to show the Edit selection (Figure-4 item 5) in the next menu. Each selection in the Edit
menu is discussed in the next sections.
B.2 (B) Configure IPv4 network to Static
To change the IPv4 configuration to Static, start from the Main menu described in the “Start IPv4 network
changes” section.