Release Notes

11 Dell PowerEdge VRTX Networking | Version 1.6
2 Dell PowerEdge VRTX 1GbE or 10GbE switch
configuration via GUI
To configure the PowerEdge VRTX 1GbE or 10GbE switch IOM, follow the steps below:
1. Log in to the CMC.
2. Log in to the VRTX Switch IOM.
3. Configure the VLANs.
4. Configure the trunk ports.
5. Configure the Link Aggregations Ports.
Note: The following sections include detailed instructions on each of the steps above.
Section 3.2 includes additional CLI configuration commands.
2.1 Logging into CMC GUI
For instructions on configuring CMC settings, see the “Chassis Management Controller
Version x.x for Dell PowerEdge VRTX User's Guide” at dell.com/support/manuals.
1. Go to the LCD display on the front of the PowerEdge VRTX system.
2. Select IP Summary from the main menu screen.
The CMC IP address displays along with iDRAC IP address.
Note: Navigate using the up and down arrow buttons. Make selections using the center
button.
3. Open a web browser.
4. Enter the CMC IP address from step 2 in the address field.
5. Enter the default Username: root and Password: calvin in the Dell PowerEdge
VRTX CMC Login screen and click Submit.
The Chassis Management Controller GUI displays. See Figure 9.