Release Notes

8 Dell PowerEdge VRTX Networking | Version 1.6
1.3 VRTX 10GbE Switch Module (R1-2210)
The VTRX 10GbE Switch Module, model R1-2210, is a layer 2 switch that supports speeds
up to 10 Gbps. Both the switch GUI and CLI provide access for configuring the switch. The
OOB management IP must be on a different IP subnet than those defined on all other switch
interfaces (port, VLAN). Blade servers are connected to internal (te 1/1 – te 4/4) ports. The
internal ports communicate together allowing for east-west traffic. The external ports allow for
north-south communication to any upstream devices on the network as if the ports were
typical switching/bridging device. Key features of the R1-2210 include the following internal
(server-to-server) and external connections:
 Internal 10Gb SFP+ ports: 16
 External 10Gb SFP+ ports: 4
 External 1Gb RJ45 ports: 2
Figure 6 and Figure 7 show the switch port mapping for the R1-2210.
VRTX 10Gb switch port mapping
Switch
Blade Server 4
te 4/1
te 4/2
te 4/3
te 4/4
Blade Server 3
te 3/1
te 3/2
te 3/3
te 3/4
Blade Server 2
te 2/1
te 2/2
te 2/3
Blade Server 1
te 1/1
te 1/2
te 1/3
te 1/4
te 0/3
gi 0/2
te 0/2
te 0/4
gi 0/1
OOB
te 0/1
te 2/4