Dell Smart Plug-in Version 4.0 for HP Operations Manager 9.
Release Type and Definition Dell Smart Plug-in (SPI) for HP Operations Manager (HPOM) enables the datacenter customers to monitor the Dell devices (servers, chassis, remote access controllers, storage, and network switches) in an environment managed by HP Operations Manager console. Dell Smart Plug-in for HP Operations Manager also supports console launch of Dell devices and other Dell tools to perform further troubleshooting and configuration or management activities. Version: 4.0 Rev.
PowerEdge VRTX (VRTX CMC), PowerEdge M1000e (CMC), PowerEdge FX2 (FX2 CMC), and PowerEdge 1955 Chassis (DRAC/MC) Dell EqualLogic PS-Series Storage Arrays: PS5000, PS5500, PS4000, PS6000, PS6010, PS4100, PS6100, PS6500, PS6510 PS4110, PS6110, PSM4110, and PS6210 Dell PowerVault MD Storage Arrays: MD3000, MD3000i, MD3200, MD3200i, MD3220, MD3220i, MD3600i, MD3600f, MD3620i, MD3620f, MD3260, MD3260i, MD3660i, MD3660f, MD3060e, MD3400, MD3420, MD3800i, MD3820i, MD3800f, MD3820f, MD3460, MD3860i, and MD3860f Del
- Dell PowerEdge VRTX Chassis Management Controller (VRTX CMC) - Dell OpenManage Switch Administrator Console - Dell Compellent Storage Manager Console - Dell Switch Telnet Tool * Support for the following one-to-many Dell device specific console launches - Dell OpenManage Network Manager Console - Dell Compellent Enterprise Manager Client Console * Upgrading Dell SPI v3.0 to Dell SPI v4.0. * Support for HPOM 9.0 Management Server on Microsoft Windows Server 2012.
below the normal threshold. - BAT1024 : Errors detected with battery on . - BAT1025 : is unable to recover cached data from the Battery Backup Unit (BBU). - BAT1033 : The battery on was removed. - Controller Object Traps - CTL48 : A foreign configuration was detected on . - CTL72 : The foreign configuration overflow has occurred on . - CTL73 : Foreign configuration is imported only partially.
Product communities, and forums, see “http://en.community.dell.com/techcenter/systemsmanagement/w/wiki/4115.dell-openmanage-connections-and-integrations.aspx.” Known Issues * When you uninstall the Dell SPI, the following error may display: "The Setup must update files or services not updateable while the system is running. If you choose to continue, a reboot is required to complete the setup." You can ignore this error as the uninstallation of the Dell SPI is successful.
* If the Compellent Storage Arrays are added as External nodes and are classified in HPOM, then the Compellent Storage Manager Console fails to launch from the SNMP trap alert messages received from those devices. Limitations * Warranty report is supported for Dell Compellent device having firmware version 6.4 or later. * Dell Compellent traps are associated to the nodes if the firmware version is 6.5.1 or later.
4. Select the appropriate service or support link based on your need.From Dell Support site access the required documents as follows:– Go to dell.com/support/manuals. In the "Tell us about your Dell system" section, under "No", select "Choose from a list of all Dell products" and click "Continue". In the Select your product type section, click "Software and Security". In the "Choose your Dell Software" section, click "Enterprise System Management". To view the documents, click the required product version.