Users Guide

ACL system log message reference
This section lists the messages that are generated by the ACL process.
Table 3. OS10 ACL system log messages
System log message Severity Description Recommended action
%ROUTE_MAP_MATCH_PARA
M: Route-map <rmap-name>
Informational Match address based on ACL is not
applicable for Routing modules in VRF
<vrf-name>."
No action required.
%ACL_TABLE_FULL: ACL table
full
Informational The ACL TCAM space is of fixed size
based on each platform. The system
log is generated when there is no
space left to program additional rules
in the TCAM. This could happen when
a new application is started with the
TCAM space being full already.
Use the show acl-table-
usage detail command to
identify the list of applications
that are consuming the TCAM
space. Based on the
application usage, you must
disable the other or unused
applications. For more details
on the show acl-table-
usage detail, see
https://www.dell.com/
support/manuals/en-us/dell-
emc-smartfabric-os10/
smartfabric-os-user-
guide-10-5-2/view-acl-table-
utilization-report?guid=guid-
cd4a59db-5ccc-404f-9cdb-7
0181814dde3&lang=en-us. For
configuring or disabling the
TCAM rules, see https://
www.dell.com/support/
manuals/en-us/dell-emc-
smartfabric-os10/
smartfabric-os-user-
guide-10-5-2/quality-of-
service?guid=guid-
f52a9db8-3f2f-497c-a517-
a79e343271e0&lang=en-us.
%ACL_TABLE_PROFILE_MODIFI
ED: ACL Table profile modified,
Save and Reload the device for
the profile to be effective
Critical The ACL table profile can be
modified to increase/decrease the
size allocated to a particular
application by adjusting the sizes. The
profile modification requires a reload.
This is specific to the S51xx series of
platforms.
Reload the device for the
modified profile to become
effective.
%ACL_LOGGING: ACL_LOG: Warning When the "log" action is enabled on
a user created access-list applied to
an interface, the system log message
is generated displaying the packet
contents which match the access-list
rule.
No action required.
%ACL_LOGGING_FOR_EGRESS
_ACL: Logs cannot be generated
for Egress ACL
Warning When the "log" action is enabled on a
user created access-list applied to an
interface in the egress direction, then
the system log is generated indicating
The rule gets programmed
in the Egress ACL hardware
but the log messages for the
4
ACL system log message reference 15