Users Guide

Table 51. VLT system log messages (continued)
System log message Severity Description Recommended action
appear on the console, detected for
unit %u. Here unit represents
the VLT peer unit id.
After the detection of
VLT MAC mismatch, If user
configures the same MAC in
the other VLT peer as well,
following system log will
appear cleared for unit %u
%VLT_PORT_CHANNEL_UP:
vlt-port-channel
Informational VLT port-channel is operationally UP
in one of the VLT peers. vlt-port-
channel %d is up.
No action required.
%VLT_PORT_CHANNEL_DOWN
: vlt-port-channel
Informational VLT port channel is down in both of
the VLT peers. vlt-port-channel %d is
down.
If the VLT port-channel
is down without any user
intervention, collect the
show tech-support (apply
CodeText to command
name) command output,
save the report, and
contact Technical Support
for assistance. .
%VLT_ACL_ERROR: VLT ACL
CAM table full
Warning Indicates that VLT application can not
program data forwarding rules in the
hardware. VLT ACL CAM table full.
No action required.
%VLT_HB_UP: VLT peer
heartbeat link is up
Informational Indicates that VLT heart beat or
backup link is up. VLT peer heartbeat
link is up .
No action required .
%VLT_HB_DOWN: VLT peer
heartbeat link is down
Informational Indicates that VLT heart beat or
backup link is down. VLT peer
heartbeat link is down.
If a backup link
is down without user
intervention, collect the
show tech-support
command output , SOS
report and contact technical
support representative.
%VLT_DELAY_RESTORE_STAR
T: VLT delay restore timer start
Informational Indicates that Delay restore timer
is started. Before the timer is
started, all the VLT port-channels
in the secondary node are brought
down. This timer is started only in
the VLT secondary node to delay
the restoration of services on VLT
secondary VLT port-channels. Newly
configured VLT port-channels will also
be brought down when this timer is
active. VLT delay restore timer start.
No action required.
%VLT_DELAY_RESTORE_COMP
LETE: VLT delay restore timer
stop
Informational Delay restore timer is stopped or
expired. After the expiry of this timer,
VLT port-channels will be brought up.
VLT delay restore timer stop.
No action required.
%VLT_SOFTWARE_VERSION_M
ISMATCH:VLT software version
mismatch
Informational Indicates that there is a mismatch
in VLT internal software versions
between the VLT peers.
Load the VLT peers with
installer that consists of the
same VLT version.
%VLT_PORT_ERROR_DISABLE
D: VLT port
Informational Indicates that the VLT lag is put
in error-disabled state or the VLT
lag recovered from an error disabled
If the VLT port-channel is
put in error-disabled state,
80 VLT system log message reference