Owner's Manual

flow-map

Specify if flows installed by the controller should be interpreted by the switch for placement in L2 or L3

tables.

Z9000, S4810, S4820T, S6000, and MXL

Syntax

flow-map {l2|l3} enable

Parameter

l2 Enter l2 to interpret Layer 2 flows.

l3 Enter l3 to interpret Layer 3 flows.

Defaults None (not enabled)

Command

Modes

OPENFLOW INSTANCE

Command

History

Version 9.3(0.0) Introduced on the S6000.

Version 9.2(0.0) Introduced on the S4820T and MXL.

Version 9.1(0.0) Introduced on the Z9000 and S4810.

Usage

Information

L2 flow-mapping is not supported on OpenFlow instances with an interface-type

of port.

Commands

openflow of-instance — Creates or modifies an OpenFlow instance.

flow-misses drop

Prevents flow misses (flows that do not reach their intended destination) from being copied to the

controller.

Z9000, S4810, S4820T, S6000, and MXL

Syntax

flow-misses drop

To copy flow misses to the controller, use the no flow-misses drop on the

specific OF instance.

Defaults none

Command

Modes

OPENFLOW INSTANCE

Command

History

Version 9.3(0.0) Introduced on the S6000.

Version 9.2(0.2) Introduced on the S4820T and MXL.

Version 9.2(0.2) Introduced on the Z9000 and S4810.