Owner's Manual
Dell Networking does not recommend configuring global STP instances on ports
using both legacy VLANs and OF VLANs.
Related
Commands
openflow of-instance — Creates or modifies an OpenFlow instance.
interface vlan
Creates a VLAN and associates it with an OpenFlow instance.
Z9000, S4810, S4820T, S6000, and MXL
Syntax
interface vlan vlan-id of-instance of-id
Parameters
vlan-id Enter the keyword vlan then the VLAN ID to specify a VLAN.
The range is from 1 to 4096.
of-id Enter the keyword of-instance then the OF ID to specify
an OF instance. The range is from 1 to 16.
Command
Modes
CONFIGURATION
Command
History
Version 9.3(0.0) Introduced on the S6000.
Version 9.2(0.2) Introduced on the S4820T and MXL.
Version 9.2(0.2) Introduced on the Z9000 and S4810.
Usage
Information
• You cannot configure an IP address as an OF VLAN.
• You cannot add an existing VLAN to an OpenFlow instance.
• You cannot enable STP if you have configured an OF VLAN.
• You cannot assign the default VLAN as an OF VLAN.
Related
Commands
openflow of-instance — Creates or modifies an OpenFlow instance.
multiple-fwd-table enable
Advertise all forwarding tables (ACL, L2, and L3) to the controller.
Z9000, S4810, S4820T, S6000, and MXL
Syntax
multiple-fwd-table enable
Defaults Disabled
Command
Modes
OPENFLOW INSTANCE
40