Owner's Manual

show openflow

Display general information about OpenFlow instances.

Z9000, S4810, S4820T, S6000, and MXL

Syntax

show openflow [of-instance[of-id]]

Parameter

of-instance of-

(OPTIONAL)

Enter the keywords of-instance to display information

such as administrative state, interface-type, and operational

state for all OpenFlow instances.

(OPTIONAL) Enter the keywords of-instance followed by

the OF instance ID to display details for the specified OF

instance. The range is from 1 to 16.

Defaults None

Command

Modes

EXEC

Command

History

Version 9.3(0.0) Introduced on the S6000.

Version 9.2(0.0) Introduced on the S4820T and MXL.

Version 9.1(0.0) Introduced on the Z9000 and S4810.

Example

Dell#show openflow of-instance 1

Instance : 1

Admin State : Down

Interface Type : Port

DP Id : 00:01:00:01:e8:8b:1a:30

Forwarding Tbls : acl

Flow map :

EchoReq interval: 15 seconds

Connect interval: 15 seconds

Number of Flows : 0

Packets (acl) : -

Bytes (acl) : -

Controller 1 : TCP, 10.11.205.184/6633, not-connected

Controller 2 : -

Port List :

Vlan List :

Vlan Mbr list :

Usage

Information

To display general information such as version, capabilities, and supported actions,

use the show openflow command.

Commands

openflow of-instance — Creates or modifies an OpenFlow instance.