Owner's Manual

• MODIFY FIELD — Strip VLAN header

• MODIFY FIELD — Modify IPv4 source address

• MODIFY FIELD — Modify IPv4 destination address

• MODIFY FIELD — Modify transport source port

• MODIFY FIELD — Modify transport destination port

• MAX_BYTES_TO_SEND

Limitations

• OFPAT_OUTPUT to OFPP_FLOOD and OFPP_ALL are supported on the S4810, S4820T, S6000, and

MXL switches. Support for these commands on the Z9000 was introduced in version 9.4(0.0).

• Multiple output ports are supported on S4810, S4820T, and MXL switches. Multiple output ports are

not supported on the Z9000 platform.

• The set/modify actions must precede the output ports actions. If you specify multiple output ports,

the switch cannot transmit different copies.

• You cannot specify individual output ports for ALL or FLOOD actions.