Administrator Guide
SMI-S
SMI-S Provider
The SMI-S Provider is included with the Data Collector. You can configure SMI-S during initial Data Collector installation or post-
installation by modifying the Data Collector properties. When SMI-S is enabled and configured, the Data Collector automatically installs and
manages the SMI-S Provider; no additional installation is required.
NOTE: The Storage Manager Data Collector must be installed in a Microsoft Windows environment. SMI-S is not
supported on a Virtual Appliance.
Supported Management Solutions
Storage Manager SMI-S is compatible with the following combinations of Microsoft System Center Virtual Machine Manager (SCVMM)
and Microsoft Server versions.
• SCVMM 2012 SP1 running on Windows Server 2012
• SCVMM 2012 R2 running on Windows Server 2012
• SCVMM 2012 R2 running on Windows Server 2012 R2
• SCVMM 2016 R2 running on Windows Server 2016
Supported SMI-S 1.6 Profiles
An SMI-S profile describes the management interfaces for a storage subsystem.
The Dell SMI-S provider packaged with Storage Manager supports the following SMI-S 1.6 profiles:
• Access Points
• Array
• Block Services
• Block Server Performance
• Copy Services
• Disk Drive Lite
• Extent Composition
• FC Target Ports
• Health
• iSCSI Target Ports
• Job Control
• Masking and Mapping
• Multiple Computer System
• Physical Package
• Replication Services
• Server
• Software
• Thin Provisioning
SMI-S Namespace
Use the following namespace parameters to access SMI-S.
• Interop namespace - /interop
• Array namespace - /root/compellent
11
SMI-S 317