Administrator Guide

5 In the License Information section, click Submit License.
The License information dialog box opens.
6 To enable the Chargeback feature using a license le:
a Select the License File (*.lic) radio button.
b Click Browse and navigate to the location of the license le.
c Select the license le and click Open
d Click OK.
7 To enable the Chargeback feature using a product key:
a Select the Product Key radio button.
b Type the product key in the Product Key eld.
c Click OK.
Change Storage Center Timeout Settings
Use the Edit Advanced Settings to set Storage Center timeout values.
About this task
NOTE: The Data Collector must be restarted to apply timeout setting changes.
Steps
1 Connect to the Data Collector.
a Open a web browser.
b Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c Press Enter.
The Storage Manager login page is displayed.
d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.
e Click Log In.
2
If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
3 Click Data Collector.
The Data Collector view is displayed.
4 Click the General tab, and then click the Summary subtab.
5 Expand the Advanced area located below the License Information section.
6 Click Edit.
The Edit Advanced Settings dialog box opens.
7 Set the timeout and delay settings as needed:
• Storage Center Connection Timeout – Maximum time that the Storage Center waits for a response for queries sent to the Data
Collector.
• Storage Center Connection Delay – Maximum time that the Storage Center waits to successfully connect to the Data Collector.
• Storage Center Ping Timeout – Maximum time that the Storage Center waits for a response to a ping command to the Data
Collector.
• Storage Center Read Timeout – Maximum time that the Storage Center waits while attempting read data from the Data
Collector.
8 Click OK.
The Data Collector Restart dialog box opens.
9 Click Yes.
The Data Collector service stops and restarts.
Data Collector Management
663