Storage Manager 2018 R1 インストールガイド
メモ、注意、警告 メモ: 製品を使いやすくするための重要な情報を説明しています。 注意: ハードウェアの損傷やデータの損失の可能性を示し、その問題を回避するための方法を説明しています。 警告: 物的損害、けが、または死亡の原因となる可能性があることを示しています。 © 2017 ~ 2018 Dell Inc. またはその子会社。無断転載を禁じます。Dell、EMC、およびその他の商標は、Dell Inc. またはその子会社の商標です。その他の商標は、そ れぞれの所有者の商標である場合があります。 2018 - 11 Rev.
目次 このガイドについて...............................................................................................................................................5 リビジョン履歴....................................................................................................................................................................... 5 対象読者.............................................................................................................................................................................
Storage Manager Virtual Appliance の導入.................................................................................................................. 25 仮想アプライアンスの導入............................................................................................................................................25 Storage Manager Virtual Appliance の設定.................................................................................................................. 26 プライマリ Data Collector としての 仮想アプライアンス の設定........
前書き このガイドについて 本書は、Storage Manager コンポーネントのインストールおよび設定方法を。 リビジョン履歴 文書番号:680-028-024 リビジョン 日付 説明 A 2018 年 3 月 Storage Manager 2018 R1 のイニシャルリリース B 2018 年 5 月 Storage Manager 2018 R1.2 用にアップデート C 2018 年 8 月 Storage Manager 2018 R1.10 用にアップデート D 2018 年 11 月 Storage Manager 2018 R1.
Storage Center 関連文書 • 『Storage Center Release Notes』(Storage Center リリースノート) • 『Storage Center Deployment Guides』(Storage Center 導入ガイド) 特定の製品バージョンに関する機能と、未解決および解決済みの問題に関する情報を示します。 Storage Center コントローラ、スイッチ、およびエンクロージャのケーブル接続手順と、新しい Storage Center の設定手順を示します。 • 『Storage Center Software Update Guide』(Storage Center ソフトウェアアップデートガイド) Storage Center ソフトウェアの以前のバージョンから最新バージョンへのアップデートの方法を説明します。 • 『Storage Center Update Utility Administrator’s Guide』(Storage Center Update Utility 管理者ガイド) ストレージシステム上で Storage C
Fibre Channel FS8600 アプライアンスの 1 Gb イーサネットクライアント接続から 10 Gb イーサネットクライアント接続へのアップグレードに関する情報 を示します。この文書の対象読者は、FS8600 アプライアンスハードウェアサービスを実行する Dell の設置担当者および認定ビジネスパートナーで す。 Dell TechCenter • Dell TechCenter Dell TechCenter は、Dell サポートサイトの別の場所に移動しました。デルのストレージ製品に関しては、次のサイトのテクニカルホワイトペーパー、ベ ストプラクティスガイド、FAQ を参照してください。 – TechCenter の移行に関する FAQ(TechCenter のコンテンツの移行に関する詳細) – Dell サポート(検索可能なナレッジベース) – Dell Technical Resources(ネットワーキング、サーバ、ストレージなど、移行された TechCenter のトピック分野) Dell へのお問い合わせ Dell では、オンラインおよび電話ベースのサポートとサービ
1 Storage Manager の概要 Storage Manager は、集中管理コンソールから Storage Center SAN、FluidFS クラスタ、PS Series グループの監視、管理、および分析ができます。 Storage Manager Data Collector は、外部データベースまたは内蔵データベースのマネージドストレージデバイスから収集したデータと警告を保存しま す。 複数の Storage Center の監視および管理タスクを実行するには、Storage Manager Client または Unisphere Central を使用して、Storage Manager Data Collector を接続します。 単一の Storage Center の監視および管理タスクを実行するには、Storage Manager Client または Unisphere を使用して、Storage Center を直接 接続します。 トピック: • Storage Manager コンポーネント • 管理互換性 • ソフトウェアおよびハードウェアの要件 • St
コンポーネント 説明 セットアップマニュアル に、災害復旧サイトをアクティブ化するために 使用できます。 Storage Manager Server Agent Storage Manager が、期限の切れたスナップ 『Storage Manager Administrator’s Guide』(Storage ショットのボリュームストレージ容量を解放でき Manager 管理者ガイド) るようにする Windows のサービス。解放しな いと、Windows によってロックされたままになり ます。 管理互換性 Storage Manager は、ストレージ製品を管理し、Microsoft 製品および VMware 製品の統合管理を提供します。 Storage Manager には、次の表に示されている製品との互換性があります。 製品 バージョン Storage Center 6.7~7.3 メモ: Storage Manager 2018 R1.10 を使用すると、Storage Center 6.
コンポーネント 要件 オペレーティングシステ 最新のサービスパックを搭載した次の 64 ビットオペレーティングシステムのいずれか ム • Windows Server 2012 • Windows Server 2012 R2 • Windows Server 2016 • Windows Server 2019 メモ: 32 ビットのオペレーティングシステムはサポートされておらず、Windows Server Core もサポートされていませ ん。 Windows ユーザーグ ループ CPU 管理者 2 個以上のコアを搭載した 64 ビット(x64)マイクロプロセッサ 100,000 以上の Active Directory メンバーまたはグループで構成されている環境の場合、Data Collector には 4 コアが必要 になります メモリ ディスク容量 次のストレージ環境のサイズに基づいて変わります。 • 4 GB:1 ~ 10 台の Storage Center または最大 3000 の合計ボリューム • 8 GB:11 台以上の Storage Center または最大 6000
Storage Manager Virtual Appliance の要件 Storage Manager Virtual Appliance には、以下の要件があります。 コンポーネント 要件 VMware ESXi ホスト 6.0 以降 のバージョン VMware vCenter サ ーババージョン 6.
コンポーネント 要件 メモ: Windows Server Core はサポートされません。 CPU 32 ビット(x86)または 64 ビット(x64)マイクロプロセッサ メモ: Linux 版の Storage Manager Client は、64 ビットのマイクロプロセッサのみをサポートします。 ソフトウェア Microsoft .NET Framework 4.
Storage Manager によって使用されるデフォルトポート Storage Manager コンポーネントは、ネットワーク接続を使用して、相互に、また他のネットワークリソースと通信します。次の表に、Storage Manager Data Collector、Storage Manager Client、および Storage Manager Server Agent によって使用されるデフォルトのネットワークポートを示します。ポ ートの多くは設定可能です。 メモ: ポートによって構成に不要なポートもあります。詳細については、各表の目的列を参照してください。 Data Collector ポート 次の表は、Storage Manager Data Collector で使用されるポートの一覧です。 着信 Data Collector ポート Data Collector の着信ポートは次のとおりです。 ポート プロトコル 名前 目的 3033 TCP ウェブサーバポート 次のデータの受信: • あらゆるクライアントからの通信(Storage Manager Client、Unisp
ポート プロトコル 名前 目的 27355 TCP Server Agent ソケットリスニ ングポート Storage Manager Server Agent 通信 35451 TCP FluidFS 管理対象の FluidFS クラスタとの通信 44421 TCP FluidFS 診断 管理対象の FluidFS クラスタからの診断の取得 クライアントポート Storage Manager Client は、次のポートを使用します。 着信ポート Storage Manager Client および Unisphere Central は、着信ポートを使用しません。 発信ポート Storage Manager Client および Unisphere Central は、次のポートへの接続を開始します。 ポート プロトコル 名前 目的 3033 TCP ウェブサーバポート Storage Manager Data Collector との通信 Server Agent ポート 次の表には、Storage Manager Server Agent によって
IPv6 を使用するには、次の表に説明されているとおりに IPv6 アドレスを割り当てます。 IPv6 接続 要件 Storage Manager Client から Data Collector • • Data Collector から Storage Center • • 16 Storage Manager の概要 Storage Manager Client コンピュータには、IPv6 アドレスが必要で す。 Data Collector サーバには、IPv4 アドレスおよび IPv6 アドレスの両方 が必要です。 Data Collector サーバには、IPv4 アドレスおよび IPv6 アドレスの両方 が必要です。 Storage Center SAN には、管理インタフェースの IPv4 アドレスおよび IPv6 アドレスの両方が必要です。
2 計画および準備 Storage Manager をインストールする前に、構成を計画し、必要なソフトウェアをインストールします。 メモ: 既存の Data Collector のインストールをアップデートするのではなく、新しい Storage Manager Data Collector をインストールする予 定の場合は、インストール中に新しい Data Collector データベースを作成する必要があります。 メモ: 既存の Data Collector データベースを使用する予定の場合は、このガイドの手順に従って、既存の Data Collector のインストールから Storage Manager Data Collector または Storage Manager Virtual Appliance の新しいインストールに移行します。 トピック: • データストレージ方法の選択 • 必要なインストール情報の収集 • データベースの準備 データストレージ方法の選択 Data Collector は、外部データベースまたはホストサーバのファイルシステム上の内蔵データベースにデータを保存す
データベース情報の記録 SQL データベースを使用する場合は、インストールに必要なデータベース情報を記録します。 項目 情報を書き留めます データベースのバージョン データベースをホストしているサー バーの名前 データベースのサーバーポート データベースのユーザー名 セキュリティ保護のため、データベースのユーザー名は安全な場所にのみ記録するようにしてください。 データベースのパスワード セキュリティ保護のため、データベースのパスワードは安全な場所にのみ記録するようにしてください。 データベースの準備 外部データベースの使用を計画している場合は、データベースごとに、データベースのタイプに対応するタスクを実行して準備します。 メモ: Data Collector データを内蔵データベースに保存する場合は、この手順をスキップします。 • • Microsoft SQL Server データベースの準備 MySQL データベースの準備 Microsoft SQL Server データベースの準備 Data Collector 用に Microsoft SQL Server データベースまたは Micr
図 1.
3 Data Collector のインストールおよび設定 Data Collector をインストールし、Data Collector のセットアップ ウィザードを使用して設定を行います。 Data Collector のインストール Storage Center へのネットワーク接続がある Windows サーバーに、Data Collector をインストールします。 前提条件 • Windows サーバは、「Data Collector の要件」に記載されている要件を満たしている必要があります。 • 「計画および準備」で説明されているタスクを完了する必要があります。 • Data Collector をインストールしているユーザーは、Windows サーバの管理者グループのメンバーである必要があります。 手順 1 Storage Manager Data Collector ソフトウェアを Windows サーバにダウンロードします。 2 ソフトウェアを解凍し、Storage Manager Data Collector のセットアップファイルをダブルクリックします。 Storage
パスワードを指定しない場合は、Data Collector 初期セットアップは、データベースユーザー(compmsauser)用に 13 文字のデフォルトパス ワードを作成します。 11 次へ をクリックします。 ポート ページが表示されます。 a b c ウェブサーバサービスに別のポート番号を指定するには、ウェブサーバサービスポートを有効にする フィールドにポート番号を入力します。 サーバエージェントサービスを有効 / 無効にするには、サーバエージェントサービスポートを有効にする チェックボックスをオンにするかオフにし ます。 サーバエージェントサービスに異なるポート番号を指定するには、サーバエージェントサービスポートを有効にする フィールドにポート番号を入 力します。 VASA サービスを有効または無効にするには、VASA サービスポートを有効にする チェックボックスをオンにするかオフにします。 VASA サービスに別のポート番号を指定するには、VASA サービスポートを有効にする フィールドにポート番号を入力します。 d SMI-S サービスを有効または無効にするには、SMI-S サービスポー
• 内部データベースの情報 Data Collector の移行要件 既存の Data Collector を新しい Data Collector に移行するには、次の要件を満たす必要があります。 • 既存の Data Collector が Microsoft SQL Server データベースを使用している場合、新しい Data Collector をホストする Windows サーバのファイ アウォールは、ポート 1433 のアウトバウンド通信を許可するように設定されている必要があります。 • 既存の Data Collector が MySQL データベースを使用している場合、新しい Data Collector をホストする Windows サーバのファイアウォールは、ポ ート 3306 のアウトバウンド通信を許可するように設定されている必要があります。 • 新しい Data Collector をホストする Windows サーバは、「Data Collector の要件」に記載の要件を満たしている必要があります。 • 新しい Data Collector をホストする Wind
a b c ウェブサーバサービスに別のポート番号を指定するには、ウェブサーバサービスポートを有効にする フィールドにポート番号を入力します。 サーバエージェントサービスを有効にするには、サーバエージェントサービスポートを有効にする チェックボックスを選択します。 サーバエージェントサービスに異なるポート番号を指定するには、サーバエージェントサービスポートを有効にする フィールドにポート番号を入 力します。 VASA サービスを有効にするには、VASA サービスポートを有効にする チェックボックスをオンにし、フィールドにサービスのポート番号を入力し ます。 VASA サービスに別のポート番号を指定するには、VASA サービスポートを有効にする フィールドにポート番号を入力します。 d SMI-S サービスを有効にするには、SMI-S サービスポートを有効にする チェックボックスをオンにし、フィールドにサービスのポート番号を入力 します。 SMI-S サービスに別のポート番号を指定するには、SMI-S サービスポートを有効にする フィールドにポート番号を入力します。 11 次へ をクリックします。 ネ
4 Storage Manager Virtual Appliance のインストール と設定 本項では、Storage Manager Virtual Appliance のインストールおよび設定の手順を説明します。 vSphere の 仮想アプライアンス の要件 Storage Manager Virtual Appliance は、vSphere サーバからの以下の条件を必要とします。 • 仮想アプライアンス は、標準データストア上に展開する必要があります。VVol データストアに 仮想アプライアンス を展開しないでください。 • vSphere サーバは、データストアのスナップショットを定期的に作成するように設定する必要があります。 Storage Manager Virtual Appliance の導入 Storage Manager Virtual Appliance を ESXi サーバ上の仮想マシンとして導入するには、VMware vSphere Web Client を使用します。仮想アプライ アンス の導入後に、Data Collector を設定します。 仮想アプライアンス
ライセンス契約 ページが表示されます。 12 すべてのライセンス契約に同意します チェックボックスを選択して、次へ をクリックします。 13 次へ をクリックします。 ストレージの選択 ページが表示されます。 14 仮想ディスクフォーマットの選択 ドロップダウンメニューから シンプロビジョン を選択します。 15 仮想アプライアンスデータを格納するデータストアを選択します。 16 次へ をクリックします。 ネットワークの選択 ページが表示されます。 17 宛先ネットワーク ドロップダウンメニューから仮想アプライアンスのネットワークを選択します。 18 次へ をクリックします。 テンプレートのカスタマイズ ページが表示されます。 a b c 19 ホスト名 フィールドに仮想アプライアンスのホスト名を入力します。 IP アドレスタイプ ドロップダウンメニューで DHCP が選択されている場合、次の手順に進みます。 IP アドレスタイプ ドロップダウンメニューで 静的 を選択した場合、仮想アプライアンスの IP アドレス、ネットマスク、デフォルトゲートウェイ、 および DNS サーバを
a 変更するサービスを選択し、編集 をクリックします。 b c d サービスのポート番号を変更するには、ポート フィールドに異なるポート番号を入力します。 サービスを有効または無効にするには、有効 チェックボックスを選択または選択解除します。 OK をクリックします。 ポートの編集 ダイアログボックスが開きます。 8 次へ をクリックします。 データベース ページが表示されます。 a b c データベースタイプ ドロップダウンメニューから Microsoft SQL Server または MySQL を選択します。 データベースサーバのホスト名または IP アドレスをホストまたは IP アドレス フィールドに入力します。 データベースサーバの TCP ポート番号を ポート フィールドに入力します。 Microsoft SQL Server 用のデフォルトポートは 1433、および MySQL 用のデフォルトポートは 3306 です。 d e f データベースを作成する管理者権限のあるデータベースユーザーのユーザー名を ユーザー名 フィールドに入力します。 データベースを作成する管理者権限のあ
Data Collector の移行要件 Data Collector の Windows のインストールから Storage Manager Virtual Appliance へ移行するには、次の要件を満たす必要があります。 • Data Collector と Storage Manager Virtual Appliance が同じバージョンの Storage Manager Data Collector ソフトウェアを実行している必要が あります。 • Data Collector の Windows のインストールには、実行中のタスクが存在しないようにする必要があります。移行後、これらのタスクが、Storage Manager Virtual Appliance に反映されないことがあります。 • VVol を使用している場合、Data Collector の移行前に、VASA プロバイダの登録を解除してください。 既存の Data Collector の移行 Storage Manager Virtual Appliance を、既存の Data Collector 情報を格納したプ
11 はい をクリックします。 Data Collector が再起動し、Unisphere Central のログインページが表示されます。 12 移行が完了したら、Storage Manager Data Collector サービスを Windows サーバで停止します。 移行後の手順 既存の Data Collector の設定に応じて、追加のセットアップタスクが必要になる場合があります。 • Active Directory の設定 • SSL 証明書のインポート、または新しい SSL 証明書の生成 Storage Manager Virtual Appliance のインストールと設定 29
5 Storage Manager クライアントのインストールおよび 設定 クライアントを Windows コンピュータにインストールし、これを使用して、Data Collector に接続します。 Storage Manager アプリケーションページへの接続 Storage Manager Data Collector のインストールおよび設定後、Storage Manager アプリケーションページに接続し、Storage Manager Client をダウ ンロードできます。 Windows 用の Storage Manager Client または Linux 用の Storage Manager Client を Storage Manager アプリケーションページからダウンロードでき ます。 Storage Manager アプリケーションページの URL は、 https://data_collector_hostname_ip:web_server_port/dc/Server/ • data_collector_hostname_IP:Data Collector のホスト名または
前提条件 • ホストコンピュータは、「Storage Manager Client の要件」に記載されている要件を満たしている必要があります。 • ユーザーは Linux コンピュータへの root 権限が必要です。 • Linux コンピュータには完全な X-Windows 環境が必要です。 手順 1 Storage Manager Client インストーラを Data Collector からダウンロードします。 a 次のコマンドを使用してディレクトリをダウンロードディレクトリに変更します。 $ cd download_directory b 次のコマンドを使用して Storage Manager Client rpm ファイルをダウンロードします。 $ wget data_collector _hostname_IP:web_server_port --no-check-certificate https:// data_collector_hostname_IP:web_server_port/dc/Server/web/apps/client/SmClient.
図 2.
• 既存の Storage Center から設定を継承する チェックボックスがオンになっていない場合、その Storage Manager が Storage Center に追加 されます。 • 既存の Storage Center から設定を継承する チェックボックスが選択されている場合、設定の継承 ダイアログボックスが表示されます。 5 (設定の継承のみ)継承する Storage Center 設定を選択します。 a b c 設定を継承する Storage Center を選択し、次へ をクリックします。ウィザードの次のページに進みます。 継承する設定の各項目のチェックボックスにチェックを付けます。 作業が完了したら、完了 をクリックします。 • SupportAssist プロキシ、Secure Console プロキシ、または SMTP サーバにパスワードが設定されていない場合、ダイアログボックスが閉 じます。 • d SupportAssist プロキシ、Secure Console プロキシ、または SMTP サーバのパスワードを設定した場合、必要なパスワードを再入力す るよ
6 Storage Manager ソフトウェアのアップデート 次のタスクを使用して、Storage Manager Data Collector、Storage Manager Client、Storage Manager Server Agent、および Storage Manager Virtual Appliance をアップデートします。 Storage Manager Data Collector のアップデート Storage Manager Data Collector を新しいバージョンにアップデートするには、以下の手順に従います。 前提条件 • アップデートしている Storage Manager Data Collector のバージョンは 15.3.
手順 1 Server Agent Manager を起動します。 2 アップグレードのチェック をクリックします。 Data Collector から Server Agent インストーラがダウンロードされます。 3 Server Agent インストーラを起動し、指示に従って Server Agent をアップデートします。 Storage Manager Virtual Appliance のアップデート Storage Manager Virtual Appliance をアップデートするには、次の手順を実行します。 このタスクについて Storage Manager Virtual Appliance をアップデートしても、VMware vSphere Client に表示されるバージョン番号は変わりません。VMware vSphere Client には、最初に導入された Storage Manager Virtual Appliance のバージョン番号が常に表示されます。 手順 1 Storage Manager Virtual Appliance のアップデートをダウンロードします