Support Matrix

Supported enclosure firmware
This section provides information about supported storage enclosure firmware.
Dell EMC Storage enclosures have two Enclosure Management Modules (EMMs). You must have both EMMs at the same firmware level
and upgrade each EMM individually. EMMs do not automatically synchronize firmware versions.
Table 3. Storage enclosure firmware
Firmware version Release date Firmware version
1.07 08 JUL 2016 • Fixed a possible issue when enclosure overall status was not in sync
with elements.
• Implements Broadcom's recommendation to remove SAS buffering
(Broadcom DataBolt) for 3 or 6 Gbps SAS drives due to a hardware
limitation.
• Fix for thermal algorithms and thermal data reporting
• Increased the SSPT queue depth to 32
1.05 18 MAR 2016 • Improved hot swap handling
• Improved two wire interface handling
1.02 14 NOV 2014 • Improved expander initialization sequence
• Enabled software flash writes for expander memory
1.01 15 SEP 2014 • Initial Release
• Earliest required firmware version
3
Supported enclosure firmware 7