Owners Manual

e. all expansion-card risers
f. integrated storage controller card
g. internal dual SD module
h. PCIe card holder
i. card retention bracket
j. heat sink(s)/heat-sink blank(s)
k. processors(s)/processor blank(s)
CAUTION: To prevent damage to the processor pins when replacing a faulty system board, ensure that you cover
the processor socket with the processor protective cap.
l. memory modules and memory module blanks
m. network daughter card
Steps
1. Disconnect the mini SAS cable from the system board.
2. Disconnect all other cables from the system board.
CAUTION: Take care not to damage the system identification button while removing the system board from the
chassis.
CAUTION: Do not lift the system board assembly by grasping a memory module, processor, or other components.
3. Hold the system-board holder, lift the blue release pin, lift the system board and slide it toward the front of the chassis.
Sliding the system board toward the front of the chassis disengages the connectors from the back of the chassis slots.
4. Lift the system board out of the chassis.
118
Installing and removing system components