Administrator Guide

6 From the RAID 6 Stripe Width drop-down menu, select a stripe width of 6 or 10 disks.
7 Click OK.
Congure an iSNS Server
Set the host name or IP address of the Internet Storage Name Service (iSNS) server on your network.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2
Click Summary.
The Summary view is displayed.
3 Click (Settings).
The Storage Center Settings dialog box opens.
4 Click the Storage tab.
5 In the iSNS Server Host or IP Address eld, type the host name or IP address of an iSNS server that provides name services for
initiators and targets on your network.
6 Click OK.
Set Up Automated Reports for an Individual Storage Center
By default, Storage Centers are congured to use the global automated report settings that are specied for the Data Collector. If you want
to use dierent report settings for a Storage Center, you can congure the automated report settings in the Storage Center properties.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 Click Summary.
The Summary view is displayed.
3 Click (Settings).
The Storage Center Settings dialog box opens.
4 Click the Automated Reports tab.
5 Deselect the Use global settings checkbox.
6 Select the checkboxes in the Automated Report Settings area to specify which reports to generate and how often to generate them.
7 Select the checkboxes in the Automated Table Report Settings area to specify which reports to generate and how often to generate
them.
NOTE
: Automated table reports can be saved in a public directory or attached to automated emails but they do not appear
in the Reports view.
8 Set the Automated Report Options
a To export the reports to a public directory, select the Store report in public directory checkbox and enter the full path to the
directory in the Directory eld.
NOTE
: The directory must be located on the same server as the Data Collector.
b To congure the Data Collector to email the reports when they are generated:
• Select the Attach Automated Reports to email checkbox to email the reports specied in the Automated Reports Settings
area.
• Select the Attach Table Reports to email checkbox to email the reports specied in the Automated Table Reports Settings
area.
NOTE
: Unisphere Central sends emails to the email address specied in the User Properties.
c Select the le format for exported and emailed Table Reports from the File Type for Table Reports drop-down box.
9 Click OK.
106
Storage Center Maintenance