Administrator Guide

8 If you selected SNMP v3, specify the users of SNMP v3 by selecting an existing user or creating a new one.
To create a new user:
a Click Create SNMP v3 User.
The Create SNMP v3 User dialog box opens.
b In the Name eld, type a user name.
c In the Password eld, type a password.
d Select an authentication method from the Authentication Type drop-down menu.
e Select an encryption type from the Encryption Type drop-down menu.
f Click OK.
g Select the user from the SNMP v3 Settings table.
9 Specify settings for the network management system to which Storage Center will send SNMP traps.
a Click Create Trap Destination.
The Create SNMP Trap Destination dialog box opens.
b In the Trap Destination eld, type the host name or IP address of the network management system that is collecting trap
information
c From the Type drop-down menu, select the notication type and the SNMP version of the trap or inform to be sent.
d In the Port eld, type the port number of the network management system.
e To create an SNMP v1 or v2 trap, in the Community String eld, type a password used to allow the Storage Center SNMP
agent to communicate with the network management system.
f To create an SNMP v3 trap, select a user from the SNMP v3 User drop-down menu.
g If you selected SNMP v1 or v2, to apply the changes to SNMP settings to other Storage Centers, check Apply these settings
to other
Storage Centers.
h Click OK.
10 If the SNMP Running status is No, click Start SNMP.
11 Click OK.
Conguring Filters to Restrict Administrative Access
Access lters can be created to selectively allow administrative access to a Storage Center based on IP address, user privilege level, or user
name. When one or more access lters are dened, administrative connections that do not match an access lter are denied.
• Unisphere does not allow you to create an access lter policy that would reject your current administrative connection.
• Access lters apply to new administrative connections only; existing administrative connections are not aected.
NOTE
: For user interface reference information, click Help.
Create an Access Filter for a Storage Center
Create an access lter to explicitly allow administrative connections from a user privilege level, specic user, IP address, or range of IP
addresses.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 Click Summary.
The Summary view is displayed.
3 Click (Settings).
The Storage Center Settings dialog box opens.
4 Click the IP Filtering tab.
5 Click Create Filter.
The Create IP Filter dialog box opens
6 Select the Storage Center user or user privilege level to allow.
Storage Center Maintenance
109