Administrator Guide

• In the Authentication Bind Password eld, type the password for the authentication bind Distinguished Name.
8 (Optional) Click Test Server to verify that the Storage Center can communicate with the specied directory servers using the
selected protocol.
9 (Optional) If Transport Layer Security (TLS) is enabled, upload a Certicate Authority PEM le.
a Click Upload Certicate.
b Browse to the location of the PEM le, select the le, and click Open. The Upload TLS Certicate dialog box opens.
NOTE: If you select the wrong PEM le, click Upload Certicate in the Upload TLS Certicate dialog box to select a
new le.
c Click OK to upload the certicate.
10 Click Next. The Kerberos Settings page opens.
11 (Optional) Select the Enabled checkbox to enable Kerberos authentication.
12 To change any of the Kerberos settings, clear the Auto-Discover checkbox, and then type a new value into that eld.
• Kerberos Domain Realm: Kerberos domain realm to authenticate against. In Windows networks, this is the domain name in
uppercase characters.
• KDC Hostname or IP Address: Fully qualied domain name (FQDN) or IP address of the Key Distribution Center (KDC) to which
Storage Center will connect.
• Password Renew Rate (Days): Number of days before the keytab is regenerated. The default value is 0, which equates to a
password renew rate of 14 days.
13 Click Next.
The Join Domain page opens.
14 Type the user name and password of a domain administrator.
15 Click Next.
The Summary page opens.
16 If you want to change any setting, click Back to return to the previous page.
17 Click Finish.
18 Click OK.
Managing Directory Service Users
Directory service users can be individually granted access to a Storage Center.
NOTE
: For user interface reference information, click Help.
Grant Access to a Directory User
Grant access to a directory user to allow the user to log in to the Storage Center using his or her directory credentials.
Prerequisite
• The Storage Center must be congured to authenticate users with an external directory service.
Steps
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 Click Summary.
The Summary view is displayed.
3 Click (Settings).
The Storage Center Settings dialog box opens.
4 Click the Users and User Groups tab.
5 On the Directory Users subtab, click Add User.
The Grant Access to Directory User dialog box opens.
126
Storage Center Maintenance