Administrator Guide

The Enclosure view is displayed.
5 In the right pane, select an enclosure.
6 Click Audible Alarms, then select Request Mute.
Unmute an Enclosure Alarm
Unmute an enclosure alarm to allow it to sound.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 From the SYSTEM menu, select Hardware.
The Hardware view is displayed.
3 Click the System tab.
4 In the System tab navigation pane, click Enclosure.
The Enclosure view is displayed.
5 In the right pane, select an enclosure.
6 Click Audible Alarms, then select Request Mute O.
Clear the Swap Status for an Enclosure Cooling Fan
Clear the swap status for an enclosure cooling fan to acknowledge that it has been replaced.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 From the SYSTEM menu, select Hardware.
The Hardware view is displayed.
3 Click the System tab.
4 In the System tab navigation pane, click Fan Sensors.
The Fan Sensors view is displayed.
5 In the right pane, select the cooling fan, then click Request Swap Clear.
Clear the Swap Status for an Enclosure I/O Module
Clear the swap status for an enclosure I/O module to acknowledge that it has been replaced.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 From the SYSTEM menu, select Hardware.
The Hardware view is displayed.
3 Click the System tab.
4 In the System tab navigation pane, click I/O Modules.
The I/O Modules view is displayed.
5 In the right pane, select the I/O module, then click Request Swap Clear.
Clear the Swap Status for an Enclosure Power Supply
Clear the swap status for an enclosure power supply to acknowledge that it has been replaced.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 From the SYSTEM menu, select Hardware.
Storage Center Maintenance
169