Administrator Guide

The Hardware view is displayed.
2 Click the System tab.
3 In the System tab navigation pane, click Controllers.
The Controller view is displayed.
4 In the right pane, select the controller and click Shut Down/Restart Controller.
The Shut Down/Restart Controller dialog box opens.
5 From the drop-down menu, select Shutdown.
6 Click OK.
Restart a Controller
If the Storage Center has dual-controllers, the remaining controller continues to process I/O. If the Storage Center has only one controller,
restarting it down creates an outage.
1 From the SYSTEM menu, select Hardware.
The Hardware view is displayed.
2 Click the System tab.
3 In the System tab navigation pane, click Controllers.
The Controller view is displayed.
4 In the right pane, select the controller and click Shut Down/Restart Controller.
The Shut Down/Restart Controller dialog box opens.
5 From the drop-down menu, select Restart.
6 Click OK.
Reset a Controller to Factory Default
Reset a controller to apply the factory default settings, erase all data stored on the controller, and erase all data on the drives.
Prerequisites
• The Storage Center must be an SCv2000 or SCv3000 series controllers.
• The controller must be running Storage Center version 6.7 or later.
About this task
CAUTION
: Resetting the controller to factory defaults erases all information on the controller and all data on the drives.
Steps
1 In the right pane, click Actions→ System→ Reset to Factory Defaults.
The Reset Storage Center to Factory Defaults dialog box opens.
2 In the Factory Reset Token eld, type the text above the Factory Reset Token eld exactly as it appears in the dialog box.
3 In the Storage Center Administrator Username eld type the username of a Storage Center user with administrator-level privileges.
4 In the Storage Center Administrator Password eld type the password of a Storage Center user with administrator-level privileges.
5 To restart the controller after the reset, select Power on the Storage Center after resetting to factory defaults.
6 Click OK.
The Storage Center resets to the factory default settings.
Storage Center Maintenance
179