Administrator Guide

The Alerts view is displayed.
3 Click (Column Filters).
The Filters dialog box opens.
4 Select one or more of the following lter categories:
• Severity
• Status
• Date & Time
• Message
• Source Name
• Category
• Type
• Acknowledged
5 Select one or more lter values for the selected categories.
6 Click Apply.
7 Click X to close the Filters dialog box.
Select the Columns to Display
Show or hide columns to customize the view.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 From the MONITORING menu, select Alerts.
The Alerts view is displayed.
3 Click (Show/Hide Columns).
The Columns dialog box opens.
4 Select the checkboxes of the columns to show and clear the checkboxes of the columns to hide.
5 Click X to close the Columns dialog box.
Send Storage Center Alerts and Indications to the Data
Collector Immediately
By default, the Data Collector retrieves alerts and indications from a Storage Center at a regular interval. If you want alerts and indications
to be displayed in Unisphere Central immediately when they are triggered, congure a Storage Center to send them to the Data Collector.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 From the Summary tab, click (Settings).
The Storage Center Settings dialog box opens.
3 Click the Alerts and Logs tab.
4 Select the Send Alerts to Data Collector checkbox.
5 Click OK.
Data Collector Alerts
Data Collector alerts are a collection of messages that have been generated by events in Unisphere Central.
You can view alerts on the Data Collector tab or congure Unisphere Central to email you when events occur.
192
Storage Center Monitoring