Administrator Guide

7 Click Apply.
8 Click X to close the Filters dialog box.
Select the Date Range of Data Collector Alerts to Display
You can view Data Collector alerts for a specic time period.
1
If you are connected to a Data Collector and a Storage Center is selected from the drop-down list, click (Home) in the left
navigation pane.
2
From the MONITORING menu, select Alerts.
The Alerts view is displayed.
3 Click the Data Collector tab from the Alerts view.
4 Click (Column Filters).
The Filters dialog box opens.
5 Specify a start date and time in the Last Occurrence eld.
a Click the calendar icon and select a start date from the calendar.
b Click the clock icon and select a start time from the drop-down list.
6 Specify an end date and time in the Last Occurrence eld.
a Click the calendar icon and select a end date from the calendar.
b Click the clock icon and select a end time from the drop-down list.
7 Click Apply.
8 Click X to close the Filters dialog box.
Conguring Email Alerts for Unisphere Central Events
To receive email notications for Unisphere Central events, congure SMTP server settings for the Data Collector, add an email address to
your user account, and enable notication emails for the events.
Congure SMTP Server Settings
The SMTP server settings must be congured to allow Unisphere Central to send notication emails.
1
If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
2 Click Data Collector.
The Data Collector view is displayed.
3 Click the Environment tab and, then click the SMTP Server subtab.
4 Click Edit.
The SMTP Server Conguration dialog box opens.
5 Congure the SMTP server settings by performing the following steps:
a In the From Email Address eld, type the email address to display as the sender of emails from the Data Collector.
b In the Host or IP Address eld, type the host name or IP address of the SMTP server.
c If the port number of the SMTP server is not 25, type the correct port number in the Port eld.
d If the SMTP server requires authentication, select the Authentication checkbox, then type the user name and password in the
SMTP User Name and SMTP User Password elds.
6 Click OK.
194
Storage Center Monitoring