Administrator Guide

11 Click Yes.
The Data Collector service stops and restarts.
Congure a Login Banner Message
Set a login banner to display a message to users when they connect to a Data Collector.
1 If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
2 Click Data Collector.
The Data Collector view is displayed.
3 Click the General tab, and then click the Security subtab.
4 In the Login Message section, click Edit.
The Login Message dialog box opens.
5 Type a message to display on the login screen in the Login Banner Message eld.
6 Click OK.
Congure Data Collector Ports
Use the Ports tab to modify Data Collector ports to avoid port conicts.
About this task
NOTE
: The Data Collector must be restarted to apply port changes.
Steps
1 If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
2 Click Data Collector.
The Data Collector view is displayed.
3 Click the General tab, and then select the Ports subtab.
4 Click Edit.
The Edit Port dialog box opens.
5 Select the name of the service to edit.
• Web Server Service (cannot be disabled)
• Server Agent Service
• SMI-S Service (Windows installations only)
• VASA Service
6 Select or clear the Enabled checkbox to enable or disable a port.
7 If the port is enabled, type a port number in the Port eld.
8 Click OK.
The Data Collector Restart dialog box opens.
9 Click Yes.
The Data Collector service stops and restarts.
Change Data Collector Data Source
Change the data source if you want to use a dierent database to store Unisphere Central data.
About this task
The Change Data Source option re-congures an existing primary Data Collector to use a new database.
Data Collector Management
205