Administrator Guide

c If the port number of the SMTP server is not 25, type the correct port number in the Port eld.
d If the SMTP server requires authentication, select the Authentication checkbox, then type the user name and password in the
SMTP User Name and SMTP User Password elds.
6 Click OK.
Congure Server Usage Data Update Frequency
Congure the Server Agent to update usage data every 30 minutes.
1 If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
2
Click Data Collector.
The Data Collector view is displayed.
3 Click the Environment tab, and then click the Server Agent subtab.
4 Click Edit.
The Server Agent dialog box opens.
5 Select the Periodically Update Usage Data checkbox.
When selected, server usage data is updated every 30 minutes.
6 Type the number of days of usage data to include in the Usage Data Range eld
7 Click OK.
Conguring Monitoring Settings
The Monitoring settings include SupportAssist access and conguration, automated report generation, data collection settings, and
support data conguration.
Congure a Proxy Server for a Data Collector
Congure the proxy server settings to allow the Data Collector to use a proxy server when sending diagnostic data using SupportAssist.
1
If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
2 Click Data Collector.
The Data Collector view is displayed.
3 Click the Monitoring tab, and then click the SupportAssist subtab.
4 Expand the Proxy Server area.
5 Click Edit in the Proxy Server area.
The Network Proxy Conguration dialog box opens.
6 Select the Enabled checkbox to enable the proxy server.
NOTE
: The proxy server must be enabled to congure the settings.
7 Type the host name or IP address of the proxy server in the Host or IP Address eld.
8 Type the port number of the proxy server in the Port eld.
9 If the proxy server requires a user name and password, type a user name and password in the User Name and Password elds.
10 Click OK.
The Change Values dialog box opens, which states that the Data Collector service must be stopped and restarted.
11 Click Yes.
The Data Collector service stops and restarts.
208
Data Collector Management