Administrator Guide

10 To modify the domain name used by the Storage Manager Virtual Appliance, type a new domain name, and then press Enter.
11 To add a new DNS server, type the IP address of one or more DNS servers. If there are multiple IP addresses, separate them with a
comma, and then press Enter.
12 Press 1 to conrm the changes and press Enter.
13 Press Enter to complete the conguration.
Congure IPv6 Settings
Use the Storage Manager Virtual Appliance console to modify the IPv6 network settings.
1 Using the VMware vSphere Client, launch the console for the Storage Manager Virtual Appliance.
2 Log in to the Storage Manager Virtual Appliance CLI.
3 Press 2 and Enter to display the Conguration menu.
4 Press 2 then Enter to start the Network IPv6 setup.
5 Press 1 or 2 to enable or disable DHCP, then press Enter.
6 To assign a new hostname, type a hostname, then press Enter.
7 To modify the domain name used by the Storage Manager Virtual Appliance, type a new domain name, and then press Enter.
8 To add a new DNS server, type the IP address of one or more DNS servers. If there are multiple IP addresses, separate them with a
comma, and then press Enter.
9 Press 1 to conrm the changes and press Enter.
10 Press Enter to complete the conguration.
Enable SSH for the Virtual Appliance
Use the Storage Manager Virtual Appliance console to enable SSH communication with the Storage Manager Virtual Appliance.
1 Using the VMware vSphere Client, launch the console for the Storage Manager Virtual Appliance.
2 Log in to the Storage Manager Virtual Appliance CLI.
3 Press 2 and Enter to display the Conguration menu.
4 Press 4 and Enter to display the SSH conguration.
5 Enable or disable SSH.
• To enable SSH, press 1 and Enter.
• To disable SSH, press 2 and Enter.
6 Press Enter.
Enable or Disable the Support Account for the Virtual Appliance
Use the Storage Manager Virtual Appliance console to enable or disable the support account for the Storage Manager Virtual Appliance.
1 Using the VMware vSphere Client, launch the console for the Storage Manager Virtual Appliance.
2 Log in to the Storage Manager Virtual Appliance CLI.
3 Press 2 and Enter to display the Conguration menu.
4 Press 5 and Enter to display the Support Account Enable/Disable setup.
5 Enable or disable the support account.
• To enable the support account, press 1 and Enter.
• To disable the support account, press 2 and Enter.
6 Press Enter.
Data Collector Management
217