Administrator Guide

5 Above the Mapped Servers section click +. The Map Volume to Server wizard opens.
6 Select the server to which you want to map the volume, then click Next. The wizard advances to the next page.
7 (Optional) Expand Advanced Mapping to congure LUN settings, restrict mapping paths, or present the volume as read-only.
8 Click Finish.
Map Multiple Volumes to a Server
Multiple volumes can be mapped to a server in a single operation.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2
From the STORAGE menu, select Volumes.
The Volumes view is displayed.
3 In the Volumes view, select the volumes you want to map.
• To select contiguous volumes, select the rst volume, then hold down Shift and select the last volume.
• To select individual volumes, hold down Control while selecting them.
4 Click (More Actions) and select Map Volume to Server.
The Map Volume to Server wizard opens.
5 Select the server to which you want to map the volumes, then click Next. The wizard advances to the next page.
6 (Optional) Expand Advanced Mapping to congure LUN settings, restrict mapping paths, or present the volume as read-only.
7 Click Finish.
Unmap a Volume from a Server
Unmap a volume from a server if the server no longer needs to access the volume.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2
From the STORAGE menu, select Volumes.
The Volumes view is displayed.
3 In the Volume view, click the name of the volume you want to unmap from a server to open the Volume view.
4 Click the Mappings tab.
5 Select the server(s) to unmap from the volume, then click (Delete).
The Remove Mappings dialog box opens.
6 Click Yes to unmap the volume from the server.
Promote a Volume Mapping from a Server to a Server Cluster
If a volume is mapped to a server that belongs to a server cluster, you can promote the mapping to the server cluster so that it is mapped
on all servers in the cluster.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2
From the STORAGE menu, select Volumes.
The Volumes view is displayed.
3 In the Volume view, click the name of the volume you want to promote.
4 Click the Mappings tab.
5 Select the server for which you want to promote the mapping, then click Promote to Cluster.
The Promote to Cluster dialog box opens.
6 Click OK.
54
Storage Center Administration