Administrator Guide
Steps
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 From the STORAGE menu, select Proles.
The Proles view is displayed.
3 In the Proles view, click the Storage Proles tab.
4 Click (New).
The New Storage Prole dialog box opens.
5 Congure the storage prole.
a Type a name for the storage prole in the Name eld.
b Select the storage tier (disk class) that will be used for data writes for volumes associated with the storage prole from the
Write Tier drop-down menu.
c Select the RAID level to use for volumes associated with the storage prole from the Write RAID Type drop-down menu.
d Select the RAID level to use for snapshot data in tier 1 from the Tier 1 drop-down menu.
e Select the RAID level to use for snapshot data in tier 2 from the Tier 2 drop-down menu.
f Select the RAID level to use for snapshot data in tier 3 from the Tier 3 drop-down menu.
6 Click OK.
Apply a Storage Prole to One or More Volumes
Apply a storage prole to a volume to specify the RAID level and tiers used by the volume.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2
From the STORAGE menu, select Proles.
The Proles view is displayed.
3 In the Proles view, click the Storage Proles tab.
4 Select the storage prole to apply to a volume .
5 Click Apply to Volumes.
The Apply to Volumes dialog box opens.
6 Select the volumes to which you want to apply the storage prole.
7 Click OK.
Apply a Storage Prole to a Server
Apply a storage prole to a server to specify the RAID level and tiers used by all volumes that are mapped to the server.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 From the STORAGE menu, select Proles.
The Proles view is displayed.
3 In the Proles view, click the Storage Proles tab.
4 Select the storage prole to apply to a server .
5 Click Apply to Server Volumes.
The Apply to Server Volumes dialog box opens.
6 Select the server to which you want to apply the storage prole.
7 Click OK.
80
Storage Center Administration