Administrator Guide

6. Enter a name and choose the bandwidth limit for the node in KB/s.
7. Click OK.
8. The Edit Replication QoS Schedule dialog box appears.
9. Drag the mouse to select an area, right-click on it, and choose the percentage of the bandwidth limit to allow in these day and
hour combinations.
10. Click OK.
Change a QoS Node
Change a QoS (Quality of Service) node (network level) of outgoing trac bound to a replication.
1. Click the Storage view and select a FluidFS cluster.
2. Click the File System tab.
3. Select Replications in the File System panel.
4. In the right pane, click the QoS Nodes tab.
5. Right–click on a QoS and select Edit Settings. The Edit Replication QoS Settings dialog box appears.
6. Change the name and/or the bandwidth limit for the node in KB/s.
7. Click OK.
8. The Edit Replication QoS Schedule dialog box appears.
9. Drag the mouse to select an area, right-click on it, and choose the percentage of the bandwidth limit to allow in these day and
hour combinations.
10. Click OK.
Congure Replication Throttling
Use replication throttling to ne-tune network bandwidth usage for replication of a pair of NAS volumes between two clusters.
1. Click the Storage view and select a FluidFS cluster.
2. Click the File System tab.
3. Select Replications in the File System panel.
4. In the right pane, select a replication and right-click. Select Replication Actions from the drop-down list.
5. Select Edit Replication QOS from the drop-down menu.
6. Click the Enable QOS check box, and choose a predened QOS node from the drop-down list.
7. Click OK.
Changing Replication Throttling
1. Click the Storage view and select a FluidFS cluster.
2. Click the File System tab.
3. Select Replications in the File System panel.
4. In the right pane, select a replication, and right-click. Select Replication Actions from the drop-down list.
5. Select Edit Replication QOS from the drop-down menu.
6. Clear the Enable QOS check box to disable using a QoS node.
7. Click OK.
Single Port Replication
With single-port replication, communication for all involved components uses only one port. The single port infrastructure supports
communication over IPv4 and IPv6, and is opened on all controller IPs and client VIPs.
Single port replication provides the following features:
• Trusted cluster establishment
• File system communication using a single common replication port
• Replication management communication using a single common replication port
FluidFS Data Protection
613