Administrator Guide

5. Click Finish. The Storage Manager Data Collector Setup wizard appears.
Congure the Remote Data Collector with the Data Collector Setup Wizard
Use the Data Collector Setup wizard to congure the remote Data Collector.
1. Congure the rst page of the Data Collector Setup Wizard.
Figure 93. Storage Manager Data Collector Setup Wizard
a. Under Data Collector Type, select Congure as Remote Data Collector.
b. (Optional) Under Data Collector Service Information, modify the default Data Collector ports if one or more of the default
ports are already in use.
NOTE: If a rewall is enabled on the host server, make sure these ports are allowed inbound.
c. In the Service User Type drop-down menu, select the type of Windows account under which the Data Collector will run.
NOTE: User accounts (local or domain) must be able to log in as a service and must have administrator
privileges.
d. Click Next.
The Select Primary Data Collector page appears.
Figure 94. Select Primary Data Collector Page
2. Enter the primary Data Collector information.
a. In the Server eld, type the host name or IP address of the primary Data Collector server.
b. In the Client Listener Port eld, conrm the port for the primary Data Collector. The default is 7342.
c. In the User Name eld, type the name of user with the Administrator privilege on the primary Data Collector.
Remote Data Collector
729