Users Guide
Requirement Description
• Microsoft Windows Server 2016
• Microsoft Windows 7
• Microsoft Windows 8.1
• Microsoft Windows 10
Microsoft .NET Framework Full .NET Framework version 4.6
Windows PowerShell Windows PowerShell version 4.0 or later
Replay Manager Ports
This section species the ports required for Replay Manager.
Inbound Ports
Replay Manager requires the following inbound ports for the Microsoft Windows server:
Port Function
27444 Used as the listening port for the Replay Manager Service for Windows. Allows communication between the
Replay Manager Explorer and Replay Manager Service, and communications between cluster nodes.
29176 Used as the listening port for the Exchange Verication Service.
NOTE: Replay Manager Service for Windows uses port 29129 to communicate with the Replay Manager Provider. This port
should not be opened on the rewall. The communication is between the local service and the local provider only.
Outbound Ports
Replay Manager requires the following ports to be opened on the host-based rewall for trac initiated from the Microsoft Windows
server:
Port
Function
443 Used to activate a Replay Manager license using the Internet, and to communicate with the Storage Center.
3260 Used by the Microsoft iSCSI Software Initiator to make an iSCSI connection to Storage Center.
IPv6 Support
Replay Manager supports IPv6 addresses for the following connections.
Type
Supported Connections
Windows
• Replay Manager Explorer to Replay Manager Service
• Replay Manager PowerShell snapin to Replay Manager Service Windows
VMware
• Replay Manager Explorer to Replay Manager Service for VMware (RMSV)
• Replay Manager PowerShell snapin to RMSV
Overview 13