Administrator Guide

• ALUA is not automatically enabled Live Volume ALUA is not automatically enabled under the following circumstances:
• Swapping Roles. However if ALUA is enabled on one or more of the systems, that status is reported and persists.
• Existing Live Volumes after system upgrades. Use the ALUA optimization wizard to enable Live Volume ALUA.
• ALUA Optimization Wizard: If one or more Live Volumes are not ALUA optimized, a message is displayed in a banner at the top of
the Live Volume tab in the Replications & Live Volumes view. Clicking the Update to ALUA Optimized link in the banner opens
the ALUA optimization wizard. The wizard provides a guided process to enable ALUA optimization on existing Live Volumes.
NOTE: The system must undergo a service outage (such as server rescans or reboots) to fully enable Live Volume
ALUA support. This requirement is due to the path information memory of Multipath Input Output (MPIO) drivers on
various servers. Because it is a disruptive operation, enabling Live Volume ALUA on existing Live Volumes should be
performed during a maintenance window.
• Non-optimized path reporting Non-optimized path reporting is enabled or disabled using one of these methods:
• In the ALUA Optimization Wizard: Disable or enable non-optimized path reporting by selecting or clearing the Report Non-
optimized Paths check box (see Enable Live Volume ALUA Optimization).
• In the Edit Live Volume Settings dialog box: Enable or disable non-optimized path reporting by clearing or selecting the Report
Non-optimized Paths check box (see Enable or Disable Non-Optimized Path Reporting).
• Microsoft Windows Environments: Using non-optimized paths is not recommended in Microsoft Windows environments and
reporting non-optimized path reporting should be disabled. When all paths are reported as non-optimized, MPIO drivers do not
function in a round-robin as expected. Data transfer is reduced to a single path causing a delayed failover.
NOTE: Certain Windows Server 2016 versions can support non-optimized path reporting properly. For more
information and best practice guidelines for configuring MPIO on Microsoft Server 2016, see the Dell EMC SC Series
Storage and Microsoft Multipath I/O white paper on the Dell support site.
Enable Live Volume ALUA Optimization
Use the ALUA optimization wizard to enable ALUA optimization on existing Live Volumes that are eligible to be upgraded.
Steps
1. Click the Replications & Live Volumes view.
2. Click the Live Volumes tab.
The Live Volumes view is displayed.
3. In the right pane, a Live Volume ALUA banner message is indicates that Live Volumes are available that are eligible for ALUA
optimization. On the right side of the banner, click Update to ALUA Optimized.
The Update to ALUA Optimized wizard opens. The first dialog box displays a list of Live Volumes that are not ALUA optimized but
are capable of becoming ALUA optimized.
NOTE:
The Live Volume ALUA banner message is displayed if Storage Manager detects one or more Live Volumes
that have not been ALUA optimized and both Storage Centers support ALUA optimization.
4. Select the Live Volumes that you want to optimize and click Next.
A dialog box displays a warning message and an option to reset the secondary server mappings.
• If you select the Reset Secondary Server Mappings check box, the server mappings of the Secondary Live Volumes are reset
and will cause an immediate outage. A manual rescan must be performed.
• By default, the Reset Secondary Server Mappings check box is cleared. This will not cause an outage. The secondary side
servers must be restarted later during a maintenance operation.
NOTE:
Because enabling Live Volume ALUA is a disruptive process, is should be performed during a maintenance
operation.
5. Click Next.
A dialog box displays a warning message and an option to enable or disable reporting non-optimized paths.
• By default, the Report Non-optimized Paths check box is selected. This will cause Live Volumes to report non-optimized ALUA
paths from the secondary system.
• If you clear the Reset Secondary Server Mappings check box, Live Volumes will not report non-optimized ALUA paths from the
secondary system.
NOTE:
When all paths are reported as non-optimized, Microsoft Multipath Input Output (MPIO) drivers does not
perform round-robin path usage as expected. As a result, data transfer is reduced to a single path and causes a long
delay for failover. Therefore, using non-optimized paths is not recommended in Microsoft Windows environments
and non-optimized path reporting should be disabled.
508 Storage Center Replications and Live Volumes