Install Guide
Figure 4. Network Adaptor and Max Memory Settings Page
4. Select the network adapter and specify the memory limit for the Data Collector.
a. If the server that hosts the Data Collector has multiple network adapters, select which adapter the Data Collector should
use for communication.
• To select a network adapter automatically, select the Automatically Select Network Adapter check box.
• To manually select a network adapter, select a network adapter from the drop-down menu.
b. In the Max Memory Settings area, select an option to specify the maximum amount of memory that can be used by the
Data Collector. If the Data Collector manages many Storage Centers, increasing this limit can improve performance.
NOTE: Specify a value that is less than the total memory available to the Data Collector host server.
c. Click Next. The SupportAssist System State Information Collection and Storage page appears.
5. To accept the SupportAssist System State Information Collection and Storage agreement, select the check box below the
agreement.
NOTE: SupportAssist collects diagnostic data from Storage Manager then sends it to technical support. If you do
not accept the agreement, proactive technical support services that rely on SupportAssist will not be available to
you.
6. Click OK. The Create Administrator User page appears.
Figure 5. Create Administrator User Page
7. Create an administrator user.
a. Type a user name, password, and password conrmation.
Installing and Conguring the Data Collector
21