Reference Guide

Table 1. Storage Center Network and Administrator (continued)
Management IPv4 address (Storage Center management address) ____ . ____ . ____ . ____
Controller IPv4 address (Controller 1 MGMT port) ____ . ____ . ____ . ____
Controller IPv4 address (Controller 2 MGMT port) ____ . ____ . ____ . ____
Subnet mask ____ . ____ . ____ . ____
Gateway IPv4 address ____ . ____ . ____ . ____
Domain name _____________________
DNS server address ____ . ____ . ____ . ____
Secondary DNS server address ____ . ____ . ____ . ____
Storage Center Administrator
Password for the default Storage Center Admin user _____________________
Email address of the default Storage Center Admin user _____________________
iSCSI Fault Domain Information
For a storage system with iSCSI front-end ports, record network information for the iSCSI fault domains. This information is
needed to complete the Discover and Configure Uninitialized Storage Centers wizard.
NOTE:
For a storage system deployed with two Ethernet switches, Dell EMC recommends setting up each fault domain on
a separate subnet.
Table 2. iSCSI Fault Domains
iSCSI Fault Domain 1
Target IPv4 address ____ . ____ . ____ . ____
Subnet mask ____ . ____ . ____ . ____
Gateway IPv4 address ____ . ____ . ____ . ____
IPv4 address for storage controller module 1: port 1 ____ . ____ . ____ . ____
IPv4 address for storage controller module 2: port 1 ____ . ____ . ____ . ____
(Four port HBA only) IPv4 address for storage controller module 1: port 3 ____ . ____ . ____ . ____
(Four port HBA only) IPv4 address for storage controller module 2: port 3 ____ . ____ . ____ . ____
iSCSI Fault Domain 2
Target IPv4 address ____ . ____ . ____ . ____
Subnet mask ____ . ____ . ____ . ____
Gateway IPv4 address ____ . ____ . ____ . ____
IPv4 address for storage controller module 1: port 2 ____ . ____ . ____ . ____
IPv4 address for storage controller module 2: port 2 ____ . ____ . ____ . ____
(4-port HBA only) IPv4 address for storage controller module 1: port 4 ____ . ____ . ____ . ____
(4-port HBA only) IPv4 address for storage controller module 2: port 4 ____ . ____ . ____ . ____
Additional Storage Center Information
Network Time Protocol (NTP) and Simple Mail Transfer Protocol (SMTP) server information is optional. Proxy server
information is also optional, but it may be required to complete the Discover and Configure Uninitialized Storage Centers
wizard.
2