Setup Guide

Figure 5. Front Bezel
2 Insert the left end of the bezel into the securing slot until the release latch snaps into
place.
3 Secure the bezel with the keylock.
Next step
Install the expansion enclosures in the rack. See the instructions included with the
expansion enclosure or in the expansion enclosure Service Guide for detailed steps.
Connect the Power Cables
Connect power cables to the storage system.
1 Make sure that the power switches are in the OFF position before connecting the
power cables.
2 Connect the power cables securely to both power supply/cooling fan modules in the
storage system chassis.
10
Setting Up the Storage System