Administrator Guide

The Thresholds view is displayed.
3. Click the Definitions tab.
4. Use Shift+click or Control+click to select the threshold definitions to remove.
5. Click (Delete).
The Delete Threshold Alert Definitions dialog box opens.
6. Click OK.
Assigning Storage Objects to Threshold Definitions
You can add or remove the storage objects that are monitored by threshold definitions.
Assign Storage Objects to a Threshold Definition
Add storage objects to a threshold definition to monitor the storage objects.
About this task
Storage objects cannot be added to a threshold definition that has the All Objects checkbox selected.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
The Unisphere Central Home page is displayed.
2. From the MONITORING menu, click Thresholds.
The Thresholds view is displayed.
3. Click the Definitions tab.
4. Select the threshold definition to which to assign storage objects.
5. Click Add Objects.
The Add Objects wizard is opens.
6. Select the storage objects to assign to the threshold definition.
7. Click Next.
The Summary page is displayed.
8. Click Finish.
Unassign Storage Objects from a Threshold Definition
Remove storage objects from a threshold definition to stop monitoring the storage objects.
About this task
Storage objects cannot be removed from a threshold definition that has the All Objects check box selected.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. From the
MONITORING menu, click Thresholds.
The Thresholds view is displayed.
3. Click the Definitions tab.
4. Select the threshold definition from which you want to remove storage objects.
5. Click Remove Objects.
The Remove Objects dialog box opens.
6. Select check boxes of the storage objects to remove from the threshold definition.
7. Click OK.
282
Storage Center Monitoring