Administrator Guide
更新 Storage Center
Storage Center 将尝试与 SupportAssist 更新服务器联系以检查更新。如果您不使用 SupportAssist,您必须使用 Storage Center
Update Utility 更新 Storage Center 操作系统,然后再继续。
步骤
• 如果没有可用更新,将显示 Storage Center 最新页面。单击下一步。
• 如果有可用更新,将列出当前版本和可用 Storage Center 版本。
1. 单击安装,更新至最新版本。
2. 如果更新失败,请单击重试更新,尝试再次更新。
3. 更新完成后,单击下一步。
• 如果不接受 SupportAssist 数据收集和存储协议,Storage Center 将无法检查更新。
• 要继续操作而不检查更新,请单击下一步。
• 要接受协议并检查更新:
1. 单击 Accept SupportAssist Data Collection and Storage Agreement(接受 SupportAssist 数据收集和存储协议)以查看该
协议。
2. 选择 By checking this box you accept the above terms(选中该复选框即表示您接受上述条款)。
3. 单击下一步。Storage Center 尝试联系 SupportAssist 更新服务器以检查是否有更新。
• 如果 Storage Center 无法连接至 SupportAssist 更新服务器,将显示 Setup SupportAssist Proxy Settings(设置 SupportAssist
代理服务器设置)对话框。如果站点不能直接访问互联网但使用 Web 代理,则配置代理设置:
1. 选择启用。
2. 输入代理设置。
3. 单击确定。Storage Center 尝试联系 SupportAssist 更新服务器以检查是否有更新。
配置 Storage Center Update Utility
Storage Center Update Utility 用于更新未连接到 SupportAssist 更新服务器的 Storage Center。如果 SupportAssist 未启用,则将
Storage Center 配置为使用 Storage Center Update Utility。
前提条件
必须禁用 SupportAssist。
关于此任务
如果 Storage Center 无法检查更新,则显示无法检查更新页面。
步骤
1. 单击使用 Update Utility 服务器并设置配置。
此时将显示配置 Update Utility 对话框。
2. 在 Update Utility 主机或 IP 地址字段中,键入 Storage Center Update Utility 的主机名或 IP 地址。
3. 在 Update Utility 端口字段中,键入 Storage Center Update Utility 的端口。
Storage Center 将检查 Storage Center Update Utility 上的更新,然后应用更新(如有必要)。
注: 如果 Storage Center 无法连接至 Update Utility,则显示编辑 Update Utility 配置对话框。
设置默认存储配置文件(仅限 SCv2000 系列 系列控制器)
存储配置文件确定创建卷时使用的 RAID 类型。
步骤
1. 从默认存储配置文件下拉菜单中选择一个配置文件。
注: 如果您计划将数据导入到此 Storage Center,建议使用最佳效率存储配置文件。
2. (可选)要允许在创建卷时选择不同的存储配置文件,请选中允许在创建卷时选择存储配置文件旁边的复选框。
3. 单击下一步。
54 Storage Center 部署