Administrator Guide
Table Of Contents
- 关于本指南
- Unisphere 和 Unisphere Central 2020 R1 管理员指南
- Unisphere 概览
- 使用入门
- Storage Center 概览
- Storage Center 部署
- Storage Center 管理
- Storage Center 服务器管理
- Storage Center 维护
- 管理 Storage Center 设置
- 配置 Storage Center 以继承设置
- 管理 Storage Center 用户和组
- 用户权限级别
- 用户组
- 用户帐户管理和验证
- 管理本地 Storage Center 用户
- 创建本地 Storage Center 用户
- 配置新 Storage Center 用户的默认用户首选项
- 增加本地 Storage Center 用户的权限级别
- 更改本地 Storage Center 用户的会话超时
- 更改 Storage Center 用户的首选语言
- 启用或禁用本地 Storage Center 用户的访问
- 修改本地 Storage Center 用户的本地组成员资格
- 配置本地 Storage Center 用户的首选项
- 修改关于本地 Storage Center 用户的描述性信息
- 更改本地 Storage Center 用户密码
- 删除本地 Storage Center 用户
- 还原删除的本地 Storage Center 用户
- 管理本地 Storage Center 用户组
- 管理本地 Storage Center 用户密码要求
- 启用目录服务验证
- 管理目录服务用户
- 管理目录用户组
- 管理前端 I/O 端口
- 管理后端 I/O 端口硬件
- 使用容错域对 Fibre Channel I/O 端口分组
- 使用容错域对 iSCSI I/O 端口分组
- 使用容错域对 SAS I/O 端口分组
- 管理磁盘和磁盘文件夹
- 管理安全数据
- 管理数据冗余
- 管理磁盘机柜
- 管理 Storage Center 控制器
- 更新 Storage Center
- 关闭和重新启动 Storage Center
- 管理现场可更换单元 (FRU)
- 远程 Storage Center 和复制 带宽控制
- Storage Center 复制和 Live Volume
- Storage Center 复制
- Storage Center Live Volume
- Live Volume 要求
- Live Volume 类型
- Live Volume 角色
- Live Volume 自动故障转移
- Live Volume 的受管复制
- 创建 Live Volume
- 修改 Live Volume
- 交换 Live Volume 的主要 Storage Center
- 取消 Storage Center 角色交换
- 更改 Live Volume 的传输类型
- 更改同步 Live Volume 的同步模式
- 向 Live Volume 添加受管复制
- 包含活动快照数据
- 为 Live Volume 启用或禁用重复数据消除
- 更改 Live Volume 的带宽控制
- 配置 Live Volume 以将数据写入到目标的最低层
- 允许将存储复制到最低层选择
- 允许 Live Volume 自动交换角色
- 将 Live Volume 还原为复制
- 暂停 Live Volume
- 恢复已暂停的 Live Volume
- 为 Live Volume 设置阈值警报定义
- 删除 Live Volume
- 手动使主要 Live Volume 联机
- 强制删除 Live Volume
- 使用自动故障转移修改 Live Volume
- Live Volume ALUA
- 监测 Live Volume
- Storage Center DR 准备和激活
- 查看 Storage Center 信息
- Storage Center 监测
- Storage Center 报告
- Data Collector 管理
- Data Collector 用户管理
- SupportAssist 管理
● 要向所需的组件应用不影响服务的更新,请选择应用所需的组件 - 不影响服务。
● 要应用所有更新(包括影响服务的更新),请选择应用所有更新 — 服务影响。
注: 影响服务的安装类型需要中断控制器。服务将被中断。
8. 单击安装更新。
9. (可选)如果选择应用所有更新和立即下载并安装,将打开下载并安装更新确认对话框。输入 Storage Center 管理员用户名和密
码以继续。
此时,更新 Storage Center 对话框会打开。此对话框显示安装过程的详细信息,并每隔 30 秒更新这些详细信息。这也将在“摘
要”选项卡中,以及在 Storage Center 详细信息的更新状态列中显示为蓝色的信息栏。如果更新失败,请单击重试以重新启动中
断的过程。
10. 单击确定。
如果更新影响服务,则与 Storage Center 之间的连接将丢失。
使用 Storage Center Update Utility
如果没有 Internet 连接或 SupportAssist 已禁用,则 Storage Center Update Utility 将充当 Storage Center 的更新服务器。要使用
Storage Center Update Utility 更新 Storage Center 软件,请安装该公用程序,加载更新软件包,并启动该服务。然后,如果 Storage
Center 配置为使用 Storage Center Update Utility,则手动检查更新并更新 Storage Center 软件。如果 Storage Center 配置为使用
Storage Center Update Utility,则必须手动检查更新。
有关安装和设置 Storage Center Update Utility 的更多信息,请参阅 Dell Storage Center Update Utility Administrator
’
s Guide(Dell
Storage Center Update Utility 管理员指南)。
将 Storage Center 配置为使用 Storage Center Update Utility
如果 Storage Center 没有连接到 Internet,则将其配置为检查更新时使用 Storage Center Update Utility。必须加载 Storage Center
distro 且必须运行 Storage Center Update Utility 服务,然后 Storage Center 才能接收来自 Storage Center Update Utility 的更新。
前提条件
必须设置 Storage Center Update Utility 并运行。
步骤
1. 如果您已连接到 Data Collector,请从 Unisphere Central 的左侧导航窗格中的下拉列表选择一个 Storage Center。
2. 单击
摘要。
此时会显示摘要视图。
3. 单击
(设置)。
此时将打开 Storage Center 设置对话框。
4. 单击 SupportAssist 选项卡。
5. 禁用 SupportAssist。 单击 关闭 。
6. 在使用更新公用程序下,选中已启用复选框。
7. 在 Update Utility 主机或 IP 地址字段中,键入 Storage Center Update Utility 的 IP 地址。
8. 在 Update Utility 端口字段中,键入 Storage Center Update Utility 的端口。
9. 单击确定。
打开 SupportAssist
如果要在 SupportAssist 禁用时使用 Storage Center Update Utility,则必须启用 SupportAssist。
步骤
1. 如果您已连接到 Data Collector,请从 Unisphere Central 的左侧导航窗格中的下拉列表选择一个 Storage Center。
2. 单击 摘要。
此时会显示摘要视图。
3. 单击 (设置)。
192 Storage Center 维护