Administrator Guide

Requirement Description
NOTE: Both Storage Centers should be running the same
version of Storage Center software.
Storage Center license No additional license is necessary.
Storage Manager conguration The source and destination Storage Centers must be added to
Storage Manager.
Storage Center communication The source and destination Storage Centers must be connected
using Fibre Channel or iSCSI, and each Storage Center must be
dened on the other Storage Center.
On the source Storage Center, the destination Storage Center
must be dened as a remote Storage Center.
On the destination Storage Center, the source Storage Center
must be dened as a remote Storage Center.
Replication QoS denitions Replication Quality of Service (QoS) denitions must be dened on
the source Storage Center.
Server
The source and destination Storage Centers must be mapped to
a server.
MPIO must be enabled on the destination server to prevent I/O
interruption during a Live Migration.
Live Migration Roles
Live Migrations have two roles: source and destination. These roles determine the active volume that is servicing I/O. The roles can be
swapped one time, either automatically or manually.
In the following examples, the server sends an I/O request that modies the source volume. The changes to the source volume are
replicated to the destination Storage Center over Fibre Channel or iSCSI.
Before Live Migration
Before a Live Migration, the server sends I/O requests only to the volume to be migrated.
Figure 11. Example of Conguration Before Live Migration
1
Server 2 Server I/O request to volume over Fibre Channel or iSCSI
3 Volume to be migrated
Storage Center Administration 121