Administrator Guide

Unmute an Enclosure Alarm
Unmute an enclosure alarm to allow it to sound.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosures and select an enclosure.
The Enclosure view is displayed.
4 Under the selected enclosure, click Audible Alarms.
5 In the right pane, right-click the audible alarm, then select Request Mute O.
Clear the Swap Status for an Enclosure Cooling Fan
Clear the swap status for an enclosure cooling fan to acknowledge that it has been replaced.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosures, then select and expand an enclosure.
The Enclosure view is displayed.
4 Under the selected enclosure, click Cooling Fan Sensors.
The Cooling Fan Sensors view is displayed.
5 In the right pane, select the cooling fan, then click Request Swap Clear.
Clear the Swap Status for an Enclosure I/O Module
Clear the swap status for an enclosure I/O module to acknowledge that it has been replaced.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosures, then select and expand an enclosure.
The Enclosure view is displayed.
4 Under the selected enclosure, click I/O Modules.
The I/O Modules view is displayed.
5 In the right pane, select the I/O module, then click Request Swap Clear.
Clear the Swap Status for an Enclosure Power Supply
Clear the swap status for an enclosure power supply to acknowledge that it has been replaced.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Hardware tab.
3 In the Hardware tab navigation pane, expand Enclosures, then select and expand an enclosure.
The Enclosure view is displayed.
4 Under the selected enclosure, click Power Supplies.
The Power Supplies view is displayed.
5 In the right pane, select the power supply, then click Request Swap Clear.
Storage Center Maintenance
301